Main Logbooks page LST commissioning Shift checklists Safe state checklists Maintenance activities LST2-4 Commissioning Old logbooks
GENERAL CAMERA DRIVE ENERGY AMC
  LST1 Drive ELOG  ELOG logo
Message ID: 249     Entry time: Thu Apr 18 09:10:29 2019
Author: Ino 
Type: PLC Software and Configuration 
Category: Hardware 
Subject: Offset of the Zero Azimuth 
Status:  

After pointing Polaris yesterday, it seems that the zero position of the telescope was incorrect but It's never had been calibrated (zero was equals to parking position towards center of tower).

So I shift the zero position of telescope by 0.869°.

As the consequence the new Parking Position = -0.869° don't be surprised.

 

ELOG V3.1.5-fc6679b