Editing GRB241030B

== Alert Information ==

== PAGE UNDER CONSTRUCTION ==

* '''Name/type of the alert''': GRB 241030B
* '''GCN circular''': [https://gcn.nasa.gov/circulars/37934]
* '''Astro-COLIBRI''': [https://astro-colibri.com/event:sb241002901]
* '''Triggered by''': SVOM/ECLAIRs
* '''Alert coordinates''':
** ''RA: 21 41 18.48 (hh mm ss), Dec: 5 5 9.6 (dd mm ss)''
** ''RA, Dec in deg (ICRS): 325.327deg, 5.086deg''
* '''Alert arrival time''': 2024-10-29 02:19:53UTC
* '''Other relevant information''':
** GCN notices + circulars: [https://heasarc.gsfc.nasa.gov/wsgi-scripts/tach/gcn_v2/tach.wsgi/?event=GRB241029A]
** Redshift (z): z = 1.072 (OSIRIS@GTC, GCN #37950 [https://gcn.nasa.gov/circulars/37950])

== LST Observations ==

* '''Dates of data-taking''': 2024-10-29 
** 2024-10-29
*** Zenith range (deg): 26 --> 40
*** Transmission9km: tbd
*** Observation condition: ''dark''
*** Observation mode: '' std wobbles''
*** Runs: 19377 - 19382
*** Joint observations with MAGIC? : ''yes (19377 - 19382)''
*** ELOG link:[	https://www.lst1.iac.es/elog/LST+commissioning/3632]
*** Important comments:

== Fast analysis ==

* Analysis by:
**Analyzer 1 name (Roger Grau - rgrau@ifae.es)
**Analyzer 2 Tora T. H. Arnesen (IAC - tora.arnesen@iac.es)

===Data-taking information===
* '''Dates of data-taking''': 2024-10-29
** Date (time of observation h) 2024-10-29: 1.488 h
***ZD range (deg): 22-42
***Observations: (see example below)

 2024-10-29: [19377 19378 19379 19381 19382]

*Data quality selection: 19376, 19380 runs did not survive the data quality selection (max NSB std: 2.3)

====Cross-check====
* '''Dates of data-taking''': 2024-10-29
** Date (time of observation h) 2024-10-29: 1.27 h
***ZD range (deg): 24-42
***Observations: (see example below)

 2024-10-29: [19378 19379 19380 19381 19382]

*Data quality selection: runs 19376 and 19377 failed default dR/dI rate and were not included

Note: run 19380 was cut from high-level analysis as elapsed_time < 300s

===General analysis information===
* source-independent analysis
* lstchain version: v0.10.12
* DL1b standard production (v0.10/tailcut84), run-wise merged files in: 

 /fefs/aswg/data/real/DL1/YYYYMMDD/v0.10/tailcut84/dl1_LST-1.Run?????.h5

====Cross-check====
* source-independent analysis
* lstchain version: v0.10.12
* DL1b standard production (v0.10/tailcut84), run-wise merged files in: 

 /fefs/aswg/data/real/DL1/20241029/v0.10/tailcut84/dl1_LST-1.Run19378.h5
 /fefs/aswg/data/real/DL1/20241029/v0.10/tailcut84/dl1_LST-1.Run19379.h5
 /fefs/aswg/data/real/DL1/20241029/v0.10/tailcut84/dl1_LST-1.Run19380.h5
 /fefs/aswg/data/real/DL1/20241029/v0.10/tailcut84/dl1_LST-1.Run19381.h5
 /fefs/aswg/data/real/DL1/20241029/v0.10/tailcut84/dl1_LST-1.Run19382.h5

===Monte Carlo information===

* All-sky MC production used: 20240131_allsky_v0.10.5_all_dec_base
* Declination line (training): dec_931

====Random forest====
Path to the models used: 

 /fefs/aswg/data/models/AllSky/20240131_allsky_v0.10.5_all_dec_base/dec_931

===DL2 data===

The config file to produce the DL2 files must be the one used to produce the RF models. Should be located together with model's files.
 

Files in:

 /fefs/aswg/workspace/roger.grau/fast_oa_Oct_2024/GRB241029A/DL2

====Cross-check====

Files in:

 /fefs/aswg/workspace/tora.arnesen/FOA/GRB241029A/DL2

===DL3 data & IRF===

Files in:
 /fefs/aswg/workspace/roger.grau/fast_oa_Oct_2024/GRB241029A/DL3

Configuration used for producing IRF/DL3 files (you can leave standard settings):

  "EventSelector": {
    "filters": {
      "intensity": [50, Infinity],
      "width": [0, Infinity],
      "length": [0, Infinity],
      "r": [0, 1],
      "wl": [0.01, 1],
      "leakage_intensity_width_2": [0, 1],
      "event_type": [32, 32]
    }
  },
  "DL3Cuts": {
    "min_event_p_en_bin": 100,
    "min_gh_cut": 0.1,
    "max_gh_cut": 0.98,
    "min_theta_cut": 0.1,
    "max_theta_cut": 0.32,
    "fill_theta_cut": 0.32,
    "allowed_tels": [1]
  },

* 70 % efficiency for both gammaness and theta gamma-ray selection energy-dependent cuts
* Point-like IRF.

====Cross-check====

Files in:

 /fefs/aswg/workspace/tora.arnesen/FOA/GRB241029A/DL3

=== High-level analysis and results ===

==== Analysis settings ====
* Gammapy version: 1.1
* 1D analysis (point-like IRF)

==== Theta2 plot ====

Settings:

* Theta2 cut for signal extraction: 0.04 deg2
* Normalization range: 0.1 - 0.4 deg2
* Number of off positions: 3
* Energy range: 0.01 - 10 TeV

==== Daily results ====
*2024-10-29: No detection
[[File:GRB20241029A_20241029_theta2_Roger.png|800 px]]

==== Cross-check ====

===== Analysis settings =====
* Gammapy version: 1.2
* 1D analysis (point-like IRF)

===== Theta2 plot =====

Settings:

* Theta2 cut for signal extraction: 0.04 deg2
* Normalization range: 0.1 - 0.4 deg2
* Number of off positions: 3
* Energy range: 0.01 - 10 TeV

===== Daily results =====
*2024-10-29: No detection
[[File:theta2_total_FOA_GRB241029A_20241029 Large.png|800 px]]

=== Significance and Excess sky maps ===

====Cross-check====

Gammapy version: 1.1

Measured energy axis bounds: 0.2 TeV - 10.0 TeV

True energy axis bounds: 0.1 TeV - 13.0 TeV

Exclusion region radius:  0.35 deg

[[File:Significance_Off_and_Excess_maps_FOA_GRB241029A_20241029.png|thumb|centre|700px|| Significance, off significance, and excess maps]]

[[File:Background_residuals_map_FOA_GRB241029A_20241029.png|thumb|centre|700px| Background residuals map]]

==General information==


==General analysis information==


==Monte Carlo information==


===Random forest===


==DL2 data==


==DL3 data & IRF==


==High-level analysis==


==Analysis Results==

=== Theta2 plot ===


=== Daily results ===


=== Stacked observations ===


=== Significance and Excess sky maps ===

=== Spectral results ===