Editing Crab Nebula Performance

=Crab Nebula Performance=


==General information==
* '''Name of the source''': Name
* '''Brief description of the source''': 
** Object type : Unknown, AGN, SNR, Pulsar, PWN, GRB, etc
** Redshift (z) :
** Other relevant information 
** RA: XX XX XX.XX (hh mm ss), Dec: +/-YY YY YY.YY (dd mm ss)
** RA, Dec in deg (ICRS): XX.XX, YY.YY

* Analysis by Name (Institute - email)

==Data-taking information==
* '''Dates of data-taking''': 
** Date (time of observation h)
***ZD range (deg): Zenith Range
***AZ range (deg): Azimuth Range
***Transmission9km: 
***Runs: 
***Joint observations with MAGIC? : Yes/No

==Monte Carlo information==
* Link to MC files used:
** Particle types: 
** ZD (deg): Zenith Range
** AZ (deg): Azimuth Range

==DL1 data==

Please include your settings to produce your DL1a and DL1b files.  This includes whether you use LSTOSA, specific versions of lstchain, dllab scripts, cleaning levels, and calibration information.

'''Example''' : 

Reprocessed using DL1a files produced by LSTOSA (lstchain v0.7.3) and dl1ab script (v0.7.5)

* original DL1a files

 /fefs/aswg/data/real/DL1/20210808/v0.7.3/tailcut84/dl1_LST-1.Run0XXXX.XXXX.h5
 /fefs/aswg/data/mc/DL1/20200629_prod5_trans_80/XXX/zenith_20deg/south_pointing/20210416_v0.7.3_prod5_trans_80_local_taicut_8_4/

* lstchain v0.7.5
* real data: tailcut8-4 (with cleaning based on pedestal RMS), dynamic cleaning

  /fefs/aswg/workspace/seiya.nozaki/data/BLLac/v0.7.3/tailcut84_dynamic_v075/DL1_raw/lstchain_standard_config.json

* MC: tailcut8-4 (with cleaning based on pedestal RMS), dynamic cleaning, PSF+NSB tuning
  "image_modifier": {
    "increase_nsb": true,
    "extra_noise_in_dim_pixels": 0.74,
    "extra_bias_in_dim_pixels": 0.38,
    "transition_charge": 8,
    "extra_noise_in_bright_pixels": 0.052,
    "increase_psf": true,
    "smeared_light_fraction": 0.125
  },

  /fefs/aswg/workspace/seiya.nozaki/data/MC/v0.7.5/tailcut84_dynamic_bllac/DL1_raw/lstchain_dl1ab_tune_MC_to_BLLac_config.json

* Produced DL1b files

 /fefs/aswg/workspace/seiya.nozaki/data/MC/v0.7.5/tailcut84_dynamic_bllac/DL1_raw/data/
 /fefs/aswg/workspace/seiya.nozaki/data/BLLac/v0.7.3/tailcut84_dynamic_v075/DL1_raw/Run0XXXX


==Random forest==

Please include your specific .json files used in producing your RFs and for which source analysis (source dependent or independent), and variabules used in the RF.  

'''Example'''

* lstchain-0.7.6.dev242+g2086cb9

* source-indep (diffuse gamma, src_r<3deg, disp_norm)
 /fefs/aswg/workspace/seiya.nozaki/data/MC/v0.7.5/tailcut84_dynamic_bllac/srcindep/RF/lstchain_standard_config.json


* source-dep
 /fefs/aswg/workspace/seiya.nozaki/data/MC/v0.7.5/tailcut84_dynamic_bllac/srcdep/RF/lstchain_src_dep_config.json

==DL2 data==

Information about your DL2 data and settings such as: specifc versions of lstchain, specfic .json version used.

'''Example''':

* lstchain-0.7.6.dev242+g2086cb9

* source-indep
 /fefs/aswg/workspace/seiya.nozaki/data/MC/v0.7.5/tailcut84_dynamic_bllac/srcindep/DL2/data/
 /fefs/aswg/workspace/seiya.nozaki/data/BLLac/v0.7.3/tailcut84_dynamic_v075/srcindep/DL2/data/dl2_LST-1.Run0XXXX_merged.h5

* source-dep
 /fefs/aswg/workspace/seiya.nozaki/data/MC/v0.7.5/tailcut84_dynamic_bllac/srcdep/DL2/data/ 
 /fefs/aswg/workspace/seiya.nozaki/data/BLLac/v0.7.3/tailcut84_dynamic_v075/srcdep/DL2/data/dl2_LST-1.Run0XXXX_merged.h5

==DL3 data selection==

Information about your DL3 data selection. 

'''Example'''
*intensity > 50
*r: [0,  1 ]
*wl: [0.1, 1 ]
*leakage_intensity_width_2: [0, 0.2 ]

* source-indep
**fixed_gh_cut: 0.3
**fixed_theta_cut: 0.2

* source-dep
**fixed_gh_cut: 0.7
**fixed_alpha_cut: 10

==High-level analysis==

Please put any information about the production of higher level analysis here.

'''Example'''

*lstchain to generate source-dep IRF, DL3
*Science Tool: gammapy 0.18.2
* point-like IRF, 1D analysis

==Analysis Results==

Please place higher-level analysis results (Spectra, SkyMaps, Lightcurves, etc) here.

=== Theta2 plot ===

=== Significance map ===

=== Excess map ===

=== Spectral results ===