Editing Fast analysis GRB240529A Arnau

==Data-taking information==
* 2024-02-28: 
** Date (time of observation h): 1.3h
***ZD range (deg): ~50-30 deg
***Observations: 
 2024-02-28: [17479, 17480, 17481, 17482, 17483]

* 2024-02-29: 
** Date (time of observation h): 
***ZD range (deg): ~60-35 deg
***Observations: 
 2024-05-29: [17507, 17508, 17509, 17510, 17511, 17512, 17513, 17514]

*Data quality selection: 
No data quality selection. run 17478 is not used because the wobble is to far from the source.

*Joint observations with MAGIC?: 
No (?)

*Information on data-taking (observations summaries): Write here if there was any problem with data-taking.
Moon observations. Moderate-zenith and High-zenith observations.

https://www.lst1.iac.es/datacheck/observation_overview/2024/05/run_summary_2024_05_28.pdf

https://www.lst1.iac.es/datacheck/observation_overview/2024/05/run_summary_2024_05_29.pdf

==General analysis information==
* source-independent analysis
* lstchain version: v0.10.7
* DL1b processed using tighter image cleaning values. Picture threshold = 14, boundary threshold = 7. These values are used to match the cuts in the MC files (see below). However, they are close to the image cleaning values required for these moon runs.

==Monte Carlo information==
Write below the MC production ID among the existing MC
* All-sky MC production used: (e.g. 20240229_dec34_nsb14)
* Declination line (training): dec_34.76


===Random forest===
Path to the models used:

 /fefs/aswg/data/models/AllSky/20240229_dec34_nsb14/dec_3476

==DL2 data==

Config file:
 /fefs/aswg/workspace/arnau.aguasca/scripts/analysis_GRB240529A/real_srcind_config_lstchain_belong_v0.10.7.json

Files in:

 /fefs/aswg/workspace/arnau.aguasca/Analysis/results/LST/real/DL2/2024052?/srcind/v0.10.7/tailcut147_dynclg_tNSBx14/AllSky_20240229_dec34_nsb14_dec_3476/dl2_*

==DL3 data & IRF==

    "EventSelector": {
        "filters": {
            "intensity": [150, Infinity],
             "width": [0, Infinity],
             "length": [0, Infinity],
             "r": [0, 1],
             "wl": [0.01, 1],
             "leakage_intensity_width_2": [0, 1],
             "event_type": [32, 32]
        }
    },
    "DL3Cuts": {
        "min_event_p_en_bin": 100,
        "global_gh_cut": 0.8,
        "gh_efficiency": 0.9,
        "min_gh_cut": 0.1,
        "max_gh_cut": 0.95,
        "global_alpha_cut": 15,
        "global_theta_cut": 0.2,
        "theta_containment": 0.7,
        "alpha_containment": 0.7,
        "min_theta_cut": 0.05,
        "max_theta_cut": 0.25,
        "fill_theta_cut": 0.25,
        "min_alpha_cut": 1,
        "max_alpha_cut": 20,
        "fill_alpha_cut": 20,
        "allowed_tels": [
            1
        ]
    },


* global cuts in both gammaness and theta gamma-ray selection cuts: 0.8 and 0.2 deg, respectively.
* Point-like IRF

== High-level analysis and results ==

=== Analysis settings ===
* Gammapy version: 1.1
* 1D analysis (point-like IRF)

=== Theta2 plot ===

Settings:

* Theta2 cut for signal extraction: 0.04 deg2
* Normalization range: 0.3 - 0.5 deg
* Number of off positions: 3
* Energy range: No cut in energy

=== Daily results ===
* 2024-05-28
[[File:theta2plot_GRB240529A_20240528.png|600 px]]

* 2024-05-29
[[File:theta2plot_GRB240529A_20240529.png|600 px]]