Editing GRB221009A calib and r0 to dl1 steps

Go back to [[GRB221009A]].

This page explains the steps to obtain the required files to calibrate the GRB221009A data and produce the DL1 files under strong moon conditions
I concerns the following data and dates:
* 2022-10-10: GRB Moon data
* 2022-10-12: GRB Moon data
* 2022-11-05: Crab Moon data

The production has been performed with '''release v0.10.5'''

==Cat-A calibration==
The coefficients are produced in the official data tree, as lstanalyser. If you want to run it locally, create your own data tree, with a link to the drs4 time, ff systematics and drs4 baseline directories and a local calibration directory (where the calibration files will be automatically stored) and add the option -b "dase_dir_of_your_tree" to the command. Below are listed the commands used for the three days. Due to the not perfect HV FF of the HV setting, some cuts are a bit relaxed by adding specific parameters to the command line.

=== 2022-10-10 and 2022-11-05 ===
For these dates we use run 10359 taken on 2022-11-05, with equal HV setting
* ''onsite_create_calibration_file -r 10359  --flatfield-heuristic -y "--FlasherFlatFieldCalculator.charge_median_cut_outliers=[-0.9, 3]" "--LSTCalibrationCalculator.npe_median_cut_outliers=[-6,6]"''

=== 2022-10-12 ===
* ''onsite_create_calibration_file -r 9620  --flatfield-heuristic -y "--FlasherFlatFieldCalculator.charge_median_cut_outliers=[-0.9, 3]" "--LSTCalibrationCalculator.npe_median_cut_outliers=[-6,6]"''

== R0 to DL1a ==
This step permits to create both the DL1a files and the interleaved files that are the input for the Cat-B calibration. These data have been first produced locally and then copied to the official tree. it has been used the script:
* ''/fefs/aswg/workspace/franca.cassol/data/real/GRB/scripts/send_multi_bash_r0_r1_GRB_221009A.py ''
NB:
*Copy the script where you prefer.
*This script asks to have a "log" and "jobs" directory below the pwd directory, where the jobs scripts, and slurm output and error files are written.
*The data of the different days are produced by commenting the lines concerning the other days (this can be improved ;-) ). 
*The listchain config files must be eventually adapted with the correct extractors. 
*The output DL1 directory must be created for each day.
The produced files have been copied to the official tree to the directory /fefs/aswg/data/real/DL1/[date]/v0.10. Due to a problem on the interleaved files search function, a link to the interleaved directory has been added for each date in /fefs/aswg/data/real/DL1/[date]
== Cat-B calibration ==
These coefficients have been produced as lstanalyser, with the following commands:
=== 2022-10-10  ===
*''onsite_create_cat_B_calibration_files_with_batch -r 9602 9603 9604 9605 9606 9607 -c 10359 -y''
NB: Do not forget to give the correct Cat-A calibration run 10359
=== 2022-10-12  ===
*''onsite_create_cat_B_calibration_files_with_batch -r 9613 9614 9615 9616 9617 -y''
NB: Run 9613 was taken with a different HV table with respect to Cat-A run, so the Cat-B coefficients are not close to 1
=== 2022-11-05  ===
*''onsite_create_cat_B_calibration_files_with_batch -r 10341 10342 10343 10344 10345 10346  -y''

NB: Some of the Crab runs have some pixels with high signal std, probably due to changing HV, they are then set as unusable for that time period (see the Cat-B pdf files in the official tree).