Difference between revisions of "Lst1 camera hardware change log"

From my_wiki
Jump to: navigation, search
(→‎LST1 camera hardware change log)
Line 32: Line 32:
 
  | Fuse Blown
 
  | Fuse Blown
 
  | [http://www.lst1.iac.es/elog/Maintenance+activities/80 elog]
 
  | [http://www.lst1.iac.es/elog/Maintenance+activities/80 elog]
 +
 +
|-
 +
! scope="row" |
 +
| 20210831
 +
| 47
 +
| 10.1.5.132
 +
| 1-135
 +
|
 +
| PLL lock of the 3rd DRS4 in the Dragon
 +
| [http://www.lst1.iac.es/elog/LST+commissioning/1924 elog]
 +
 +
|-
 +
! scope="row" |
 +
| 20210831
 +
| 123
 +
| 10.1.5.35
 +
| 2-136
 +
|
 +
| Impossible to apply HV and too high anode current even with 250 V
 +
| [http://www.lst1.iac.es/elog/LST+commissioning/1924 elog]
 +
 +
|-
 +
! scope="row" |
 +
| 20210302
 +
| 15
 +
| 10.1.6.16
 +
| 2-48
 +
|
 +
| Anode current is too low, no calib pulse
 +
| []
 +
 +
|-
 +
! scope="row" |
 +
| 20210302
 +
| 110
 +
| 10.1.5.22
 +
| 1-148
 +
|
 +
| Pulse was sometimes not in the window. Offset is lower sometimes. The third line of DRS have some problems
 +
| []
 +
 +
|-
 +
! scope="row" |
 +
| 20210302
 +
| 155
 +
| 10.1.7.150
 +
| 1-11
 +
|
 +
| could not power up this module
 +
| [http://www.lst1.iac.es/elog/LST+commissioning/1442 elog]
 +
 +
|-
 +
! scope="row" |
 +
| 20191001
 +
| 27
 +
| 10.1.6.28
 +
| 1-1
 +
|
 +
| hard to power on
 +
| []
 +
 +
|-
 +
! scope="row" |
 +
| 20191001
 +
| 102
 +
| 10.1.5.14
 +
| 2-39
 +
|
 +
| broken PMT
 +
| []
 +
 +
|-
 +
! scope="row" |
 +
| 20191001
 +
| 244
 +
| 10.1.6.152
 +
| 2-39
 +
|
 +
| unusable DRS offset
 +
| []
 +
 +
|-
 +
! scope="row" |
 +
| 20191001
 +
| 119
 +
| 10.1.5.31
 +
| 1-34
 +
|
 +
| unlocked PLL
 +
| []
 +
  
 
|}
 
|}

Revision as of 05:25, 26 August 2023

LST1 camera hardware change log

Module exchange
Date clusco module ID Module IP old ID new ID issue elog
20220511 110 10.1.5.22 1-21 2-48 Suprious trigger rate without HV elog
20220511 226 10.1.6.134 1-101 2-135 Fuse Blown elog
20210831 47 10.1.5.132 1-135 PLL lock of the 3rd DRS4 in the Dragon elog
20210831 123 10.1.5.35 2-136 Impossible to apply HV and too high anode current even with 250 V elog
20210302 15 10.1.6.16 2-48 Anode current is too low, no calib pulse []
20210302 110 10.1.5.22 1-148 Pulse was sometimes not in the window. Offset is lower sometimes. The third line of DRS have some problems []
20210302 155 10.1.7.150 1-11 could not power up this module elog
20191001 27 10.1.6.28 1-1 hard to power on []
20191001 102 10.1.5.14 2-39 broken PMT []
20191001 244 10.1.6.152 2-39 unusable DRS offset []
20191001 119 10.1.5.31 1-34 unlocked PLL []



PMT HV table (EDMS: https://edms.cern.ch/ui/#!master/navigator/document?P:100649165:100710000:subDocs)
Date from which run produced using runXXX elog
20200813
202102XX 3513 (20210215)
202103XX 3891 (20210303)
202203XX 7440 (20220323)
20220524 8410 (20220522) [1]
20220527 8485- 8472 (20220526) [2]


DRS4 pedestal file for online baseline correction
Date from which run pedestal run elog
20220527 8480 - XXX [3]
Retrieved from "https://www.lst1.iac.es/wiki/index.php?title=Lst1_camera_hardware_change_log&oldid=7974"