Difference between revisions of "Logbook MirrorInstall"
(→Enter comments in reverse time order) |
(→Enter comments in reverse time order) |
||
Line 8: | Line 8: | ||
|- | |- | ||
| 2018-05-23 || Toni, Satoshi, Yusuke, CaSana || Mirror Installation || Today we finished to install 10 mirrors on the structure (in total 181) and we finished all we can do so far. We found one camera which doesn't have its connector shielded nor 4 small clamping pieces of its holder. We found a suitable plastic bag for the shield, and we temporarily stole the small pieces from a CMOS holder on site. || | | 2018-05-23 || Toni, Satoshi, Yusuke, CaSana || Mirror Installation || Today we finished to install 10 mirrors on the structure (in total 181) and we finished all we can do so far. We found one camera which doesn't have its connector shielded nor 4 small clamping pieces of its holder. We found a suitable plastic bag for the shield, and we temporarily stole the small pieces from a CMOS holder on site. || | ||
− | [[File:MirrorInstallation20180523. | + | [[File:MirrorInstallation20180523.JPG|200px|Image: 200 pixels]] |
|- | |- | ||
| 2018-05-21 || Yusuke, Satoshi, Taku, Darga Express || Mirror Transportation || Today we successfully brought 20 mirrors (4 crates) from Mirca to Roque, distributed them at Roque putting crate covers, brought 9 empty crates from Roque to Mirca and distributed them in Mirca. || | | 2018-05-21 || Yusuke, Satoshi, Taku, Darga Express || Mirror Transportation || Today we successfully brought 20 mirrors (4 crates) from Mirca to Roque, distributed them at Roque putting crate covers, brought 9 empty crates from Roque to Mirca and distributed them in Mirca. || |
Revision as of 21:40, 23 May 2018
Enter comments in reverse time order
Trouble Shooting
- 2018/05/11
- After we hit the mirror to the bottom of the cradle, we put the soft material to that region for protecting a surface of mirrors.
- 2018/05/08
- After CaSana hit the mirror to the next mirror, they improved the way: they are inserting a thin plate if the next mirror is close.
- 2018/04/28
- While inserting a safety bolt, we damaged a little the edge of the hole. We kept this mirror today and will attach silicon paint the next working day.
- We found one fixed point which has one hole just above a sticking part of the hose band. We replaced with a new fixed point as we could not insert a bolt to that hole.
- 2018/04/26
- When Casana people tried to install one mirror, they realized a big nut did not fit the fixed point and they could not fix the fixed point. It may have happened in the dish when trying to fix the nut. We solved this problem quickly by replacing the fixed point with a new one. Still, we check if a nut fits well a fixed point of a mirror to be installed before attaching it to the cherry picker.
- Sometimes it is very hard to insert safety bolts because of glue and a tape inside the hole. We solved by using a small hammer and a small screwdriver which Holger suggested to us to use to remove glue or tape.
damaged mirrors
- 2018/05/11 (-4, -6) => sealed
- 2018/05/08 ( 0, -8) => exchanged
- 2018/04/28 (+7, +5) => sealed (not yet installed)