Difference between revisions of "OP313 Dec2023 Jan2024 LST1 analysis details"

From my_wiki
Jump to: navigation, search
(LST analysis OP313 Dec 2023 and Jan 2024)
(Systematic on the energy scale)
Line 152: Line 152:
 
Test the effect of a +/-10% shift on energy.
 
Test the effect of a +/-10% shift on energy.
  
[[File:SED_OP313_several_efficiencies.png|900px]]
+
[[File:SED_OP313_energy_scale.png|900px]]
  
 
== Test on MAGIC vs LST-1 with the same common GTIs ==
 
== Test on MAGIC vs LST-1 with the same common GTIs ==

Revision as of 13:34, 12 March 2024

LST analysis OP313 Dec 2023 and Jan 2024

Wiki page with general information on all results for the paper: December_January_paper

LST-1 analyzers:

  • Seiya Nozaki (MPP)
  • Jorge Otero-Santos (IAA-CSIC)
  • Mireia Nievas-Rosillo (IAC)
  • Daniel Morcuende (IAA-CSIC)

Links to presentation of the LST-1 analysis in several analysis and OP313 meetings


Data-taking information

  • NSB level: all data was taken in dark NSB conditions
  • Zenith angles: 15-54 deg (December 2023 data have zenith angle > 30 deg)

Good-quality selected dataset

The list of data runs below was obtained using the notebook https://github.com/cta-observatory/cta-lstchain/blob/main/notebooks/data_quality.ipynb.

We used default settings, but min_drdi_at_422pe = 1.2 instead of the default 1.5 to recover 1.7 h from January 2024 where low statistics limit us. Still, the data selected have a relative light yield above ~80%.

Also, short data runs (< 5 min) were excluded, because usually short runs are a symptom of problems during data acquisition.


Qualitycuts1 op313.png

Qualitycuts op313 2.png


'2023-12-09': [15942, 15943, 15944, 15945],
'2023-12-10': [15975, 15976, 15977, 15978],
'2023-12-11': [16007, 16008, 16009, 16010],
'2023-12-12': [16042, 16043, 16044, 16045],
'2023-12-13': [16079, 16080, 16081, 16082, 16083],
'2023-12-14': [16114, 16116, 16117, 16118, 16119],
'2023-12-15': [16150, 16151, 16152, 16153, 16154, 16155, 16156],
'2023-12-16': [16188, 16189, 16191, 16192, 16193],
'2023-12-17': [16220, 16221, 16222, 16223, 16224, 16225],
'2023-12-18': [16240, 16241, 16242, 16243, 16244, 16246],
'2024-01-09': [16293, 16294, 16295],
'2024-01-13': [16350, 16351, 16352, 16353, 16354, 16356, 16357, 16358, 16359],
'2024-01-17': [16391, 16392],
'2024-01-19': [16412, 16413, 16414, 16415],
'2024-01-21': [16418, 16419, 16420]

In total, there are 19.8 hours effective time.

  • Relative light yield of the selected data:

Evolution rel light yield op313.png

Rel light yield op313.png

Number of runs (% is w.r.t. those in Sky region & zenith range): 
   In the requested Sky region and range of dates:	 90
  + zenith in requested range:				 90
  + NSB in requested range:				 90 (100.0%) 
  + FF and pedestal interleaved events are present:	 90 (100.0%)
  + Stable pointing:					 90 (100.0%)
  + dR/dI fit P-value ok:				 90 (100.0%)
  + dR/dI LS periodogram ok:				 87 (96.7%)
  + dR/dI index ok:					 85 (94.4%)
  + dR/dI rate ok:					 83 (92.2%)
  + intensity threshold ok:				 82 (92.2%)

lstchain settings

  • lstchain version: v0.10.7
  • MC production: 20230901_v0.10.4_allsky_base_prod
  • RF models: /fefs/aswg/data/models/AllSky/20230901_v0.10.4_allsky_base_prod/dec_3476/
  • DL2 MC for IRF calculation: /fefs/aswg/data/mc/DL2/AllSky/20230901_v0.10.4_allsky_base_prod/TestingDataset/dec_3476
  • Used IRF interpolation
  • Selection cuts IRF and DL3: 70% efficiency in both gammaness and theta gamma-ray selection cuts (Mireia used 68% theta containment instead). Intensity > 50 p.e.
  • Energy threshold: ~ 40 GeV. Calculated from DL2 testing gamma MC (several nodes with similar zenith as the bulk of the telescope pointing positions: 32.059_az_102.217, 37.814_az_90, 43.197_az_87.604, 47.952_az_90, 52.374_az_110.312), weighting the default MC spectrum by a log parabola calculated from OP313 (alpha: -3.7, beta: -1.1, amplitude: 3.0e-09 TeV s-1 cm-2, E_0: 100 GeV) and assuming the same selection cuts as in the DL3 files (intensity>50 p.e., 70% efficiency in gammaness cut, and 70% efficiency in theta cut). Treatment of the DL2 MC was done using functions from lstchain.mc module

Op313 energy threshold MC.png

Gammapy settings

  • Gammapy version: v1.1
  • Energy binning:
reco energy axis: 5 GeV - 10 TeV, 5 bins per decade
true energy axis: 1 GeV - 20 TeV, 10 bins per decade
  • 3 off positions for SED and LC calculation
  • Safe mask: 5% of max. Aeff
  • Energy range for spectral fitting: 70 GeV - 1 TeV (In Mireia's analysis, the fit range starts at around 60 GeV, because uses a slightly different reconstructed energy binning)
  • redshift: 0.997

Analysis cross-check

Cross-checks of different LST-1 analysis results.


Cross-check of LST-1 SED from OP313 during high-flux period (Dec 2023):

Xcheck SED OP313.png

Cross-check of LST-1 LC from OP313 (Dec 9th 2023 to Jan 21th 2024):

Xcheck LC OP313.png


Best-fit spectral parameters
Analyzer Analysis method Spectral model EBL model Index Amplitude [x 10-8 TeV-1 s-1 cm-2] E_ref [GeV] alpha_norm
Seiya source-dependent PWL+EBL Saldana-Lopez 2021 2.37 ± 0.88 0.82 ± 0.14 100 1.0
Jorge source-independent PWL+EBL Saldana-Lopez 2021 2.07 ± 0.51 1.15 ± 0.13 100 1.0
Mireia source-independent PWL+EBL Dominguez 2011 1.86 ± 0.50 0.93 ± 0.11 100 1.0
Daniel source-independent PWL+EBL Saldana-Lopez 2021 2.00 ± 0.45 1.14 ± 0.13 100 1.0

Test on background normalization systematics

The relative difference between the background counts in two off-source regions at the same distance from the center of the field of view (0.4 deg), and equidistant from the OP313 location is 0.31% ± 0.14% (counts in the OFF region at 90 deg: 487702 ± 698, and in the OFF region at 270 deg: 486203 ± 697). Therefore we tested the effect that a factor ±0.5% in the background normalization has in the SED calculation (see best-fit model spectral parameters calculated after considering the change in background normalization for source-independent analysis, assuming PWL+EBL Saldana-Lopez 2021 model).


Bkg normalization sys op313.png


Best-fit spectral parameters after scaling the background normalization ±0.5%
Background normalization Index Amplitude [x 10-8 TeV-1 s-1 cm-2] E_ref [GeV] alpha_norm
+0.5% 2.12 ± 0.58 0.89 ± 0.14 100 1.0
-0.5% 1.86 ± 0.37 1.39 ± 0.14 100 1.0

Test varying the efficiency of gamma-ray selection cuts

We tested the effect of using several efficiencies in selection cuts. Gammaness (50%-90%) and theta (70%-90%). The hatched band in the plot below encompasses all statistical uncertainty bands of the best-fit model for each combination of efficiencies.

SED OP313 several efficiencies.png

Systematic on the energy scale

Test the effect of a +/-10% shift on energy.

900px

Test on MAGIC vs LST-1 with the same common GTIs

Test made with MAGIC (Axel's) DL3 files and LST-1 (Mireia's) DL3 files, cutting them to a common GTI selection. In total around 7.4 hours (a bit less of livetime for LST). Except at the lowest energies, the agreement is good within uncertainties and the individual bins match well.

OP313 same GTIs.png

OP313 same GTIs SED.png