Difference between revisions of "LST1Analysis MVA"

From my_wiki
Jump to: navigation, search
(Ctools)
(MVA Analysis pages)
 
(202 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
== MVA Analysis pages ==
 +
* [https://www.lst1.iac.es/wiki/index.php/BLLacAnalysis_MVA BLLacAnalysis_MVA]
 +
* [https://www.lst1.iac.es/wiki/index.php/NovaAnalysis_MVA NovaAnalysis_MVA]
 +
* [https://www.lst1.iac.es/wiki/index.php/AGNAnalysis_MVA AGNAnalysis_MVA]
 +
 
== Location of LST1 data at PIC ==
 
== Location of LST1 data at PIC ==
  
* Directory: /pnfs/pic.es/data/cta/LST/Data/ZFITS/
+
* Raw data http://data.lstcam.pic.es/tape/
  
* Web: [http://data.lstcam.pic.es/ZFITS LST1 ZFITS files on the web]  <br/>Same user/password as in CTA portal
+
* DL1 data <br/> Directory: /pnfs/pic.es/data/cta/LST/DL1 <br/> Web: http://data.lstcam.pic.es/DL1/
 +
* DL2 data <br/> Directory: /pnfs/pic.es/data/cta/LST/DL2 <br/> Web: http://data.lstcam.pic.es/DL2/
  
== Location of LST1 at La Palma ==
+
Use CTA observatory LDAP account (eg: monica.vazquez)
 +
 
 +
== Location of LST1 data at La Palma ==
  
 
* Directory: /fefs/onsite/data <br/>Use cp01/cp02 to copy out data, never the login machine
 
* Directory: /fefs/onsite/data <br/>Use cp01/cp02 to copy out data, never the login machine
 +
 +
* Latest IRF <br/>/fefs/aswg/data/mc/IRF/20200629_prod5_trans_80/zenith_20deg/south_pointing/20210923_v0.7.5_prod5_trans_80_dynamic_cleaning/off0.4deg/irf_20210923_v075_prod5_trans_80_dynamic_cleaning_gamma_point-like_off04deg.fits.gz
 +
 +
== LST1 School 2022 ==
 +
 +
https://www.lst1.iac.es/wiki/index.php/LST1School2021_MVA
 +
 +
== LST1 DL2/DL3 Data  ==
 +
 +
* Crab DL3 <br/> Location: /fefs/aswg/workspace/daniel.morcuende/data/real/DL3/20201120/v0.7.3/tailcut84/
 +
** dl3_LST-1.RunXXX.fits.gz
 +
** hdu-index.fits.gz
 +
** obs-index.fits.gz
 +
 +
* Crab DL2 with dynamic cleaning & MC (tuned NSB & PSF - ICRC version) <br/> Location: /fefs/aswg/workspace/abelardo.moralejo/Crab_tuned_MC_20210924/20201120/merged/DL2/
 +
** dl2_LST-1.Run029*h5
 +
** dl2_merged.h5
 +
 +
 +
* Check DL2 data: RF models & config
 +
<pre style="color: blue">
 +
cd /fefs/aswg/data/real/DL2/20220206/v0.8.4/tailcut84/log
 +
 +
cat sequencer_v0.8.4.cfg
 +
 +
** CONFIGURATION:
 +
 +
dl1ab_config: /fefs/aswg/lstosa/lstchain_config_v083_tailcut84.json
 +
# In principle both config files should be the same, but in case
 +
# the MC DL2 uses a different config file, it can be set here.
 +
# For testing purposes
 +
dl2_config: /fefs/aswg/lstosa/lstchain_config_v083_tailcut84.json
 +
 +
** MODELS:
 +
rf_models: /fefs/aswg/workspace/abelardo.moralejo/Crab_tuned_MC_20211231/MC/DL1b_tuned/training/models
 +
 +
</pre>
 +
 +
== DL2toDL3 conversion ==
 +
General talk on the LST1 DL3 Tools by Chaitanya Priyadarshi: [https://indico.cta-observatory.org/event/3501/contributions/29581/attachments/19810/27478/DL3_Tools_and_Spectral_analysis_of_Crab_data_with_gammapy.pdf DL3_Tools_and_Spectral_analysis_of_Crab_data_with_gammapy.pdf]
 +
 +
=== DL2toDL3 Tools ===
 +
 +
Tools are located in [https://github.com/cta-observatory/cta-lstchain/tree/master/lstchain/tools lstchain/tools]:
 +
* <font style="color: blue"> lstchain_create_irf_file</font>: create IRFs from the MC file
 +
** The IRFs can be generated using only the gamma MC file, to produce Effective Area, Energy Dispersion <br/>(and PSF for Full Enclosure IRFs, ie. without any theta cuts).
 +
** Proton and Electron MC are used to create the Background IRF.
 +
** For creating point-like IRFs, you have to pass <br>the --point-like flag in the command-line, as by default the Tools generates a Full Enclosure IRF.
 +
* <font style="color: blue"> lstchain_create_dl3_file</font>: create DL3 files
 +
* <font style="color: blue"> lstchain_create_dl3_index_files</font>: generate HDU and OBS Index files of the DL3 files created. <br/>The DL3 files are indexed as per [https://gamma-astro-data-formats.readthedocs.io/en/latest/ GADF] and using [https://cta-observatory.github.io/ctapipe/ctapipe_api/tools/index.html ctapipe tools]
 +
 +
Command options can be checked: lstchain_create_irf_file --help-all
 +
 +
=== DL2 Cuts ===
 +
Fixed cut variables & default values (see [https://github.com/cta-observatory/cta-lstchain/blob/master/lstchain/io/event_selection.py here])
 +
* fixed_gh_cut [0.6]
 +
* fixed_theta_cut [0.2]
 +
* allowed_tels [1]
 +
 +
Cut Methods:
 +
# '''--fixed-gh-cut 0.9'''
 +
# '''--config /path/to/config.json''' <br/>Example json config files for the DL3 tools are [https://github.com/cta-observatory/cta-lstchain/blob/master/docs/examples here] <br/> The DL3 JSON config file ([https://github.com/cta-observatory/cta-lstchain/blob/master/docs/examples/dl3_tool_config.json dl3_tool_config.json]) is a subset of the IRF config file ([https://github.com/cta-observatory/cta-lstchain/blob/master/docs/examples/irf_tool_config.json irf_tool_config.json]). <br/>One can '''use the IRF config file for both tools''' to ensure that the same filter cuts for both MC and real data are used.
 +
 +
'''NOTE''': the fixed_theta_cut option is not available in lstchain_create_dl3_file, so it is better to use the JSON option to be consistent with the IRF generation
 +
 +
=== Example DL2toDL3 commands ===
 +
 +
<pre style="color: blue">
 +
lstchain_create_irf_files
 +
        -g /path/to/DL2_MC_gamma_file.h5
 +
        -o /path/to/irf.fits.gz
 +
        --point-like (Only for point_like IRFs)
 +
        --fixed-gh-cut 0.9
 +
        --fixed-theta-cut 0.2
 +
        --irf-obs-time 50
 +
 +
lstchain_create_dl3_file
 +
        -d /path/to/DL2_data_file.h5
 +
        -o /path/to/DL3/file/
 +
        --input-irf /path/to/irf.fits.gz
 +
        --source-name Crab
 +
        --source-ra 83.633deg
 +
        --source-dec 22.01deg
 +
        --fixed-gh-cut 0.9
 +
 +
lstchain_create_dl3_index_files
 +
        -d /path/to/DL3/files/
 +
        -o /path/to/DL3/index/files
 +
        -p dl3*[run_1-run_n]*.fits.gz
 +
</pre>
 +
 +
==== Example DL2toDL3 commands - MVA specific ====
 +
<pre>
 +
lstchain_create_irf_files -g /Users/monicava/LST1_DATA/Abelardo/dl2_merged.h5 -o /Users/monicava/LST1_DATA/Abelardo/irf.gh01.fits.gz --point-like --config irf_tool_config_gh01.json --irf-obs-time 50
 +
lstchain_create_dl3_file -d /Users/monicava/LST1_DATA/Abelardo/dl2_LST-1.Run02967.h5 -o /Users/monicava/LST1_DATA/Abelardo/DL3_gh01 --input-irf /Users/monicava/LST1_DATA/Abelardo/irf.gh01.fits.gz --source-name Crab --source-ra 83.633deg --source-dec 22.01deg --config irf_tool_config_gh01.json
 +
lstchain_create_dl3_index_files -d /Users/monicava/LST1_DATA/Abelardo/DL3_gh01
 +
</pre>
  
 
== Run summary info/data-check ==
 
== Run summary info/data-check ==
 
* [http://sagan.gae.ucm.es/LST1/ Run-summary web in GAE] <br/> LST1 account
 
* [http://sagan.gae.ucm.es/LST1/ Run-summary web in GAE] <br/> LST1 account
  
== CTApipe ==
+
* Seiya's Crab Run list 2021[https://docs.google.com/spreadsheets/d/1S5wcgqldMN3Tt-51IseJOaRnKbDvh1QTc7fgUrCB-mc/edit#gid=2023820644 LST_RUN_CATALOG]
 +
 
 +
* Data check: [https://www.lst1.iac.es/datacheck/observation_overview/ DATACHECK]
 +
 
 +
== LST1 data formats ==
 +
File content can be obtained as follows:
 +
<pre style="color: blue">
 +
from lstchain.io import get_dataset_keys
 +
from lstchain.io.io import dl1_params_lstcam_key, dl2_params_lstcam_key, dl1_images_lstcam_key
 +
dl2_file = "/fefs/aswg/data/real/DL2/20210903/v0.7.3/tailcut84/dl2_LST-1.Run05998.0000.h5"
 +
import pandas as pd
 +
get_dataset_keys(dl2_file)
 +
</pre>
 +
<pre>
 +
Out[]:
 +
['configuration/instrument/subarray/layout',
 +
'configuration/instrument/subarray/layout.__table_column_meta__',
 +
'configuration/instrument/telescope/camera/geometry_LSTCam',
 +
'configuration/instrument/telescope/camera/geometry_LSTCam.__table_column_meta__',
 +
'configuration/instrument/telescope/camera/readout_LSTCam',
 +
'configuration/instrument/telescope/camera/readout_LSTCam.__table_column_meta__',
 +
'configuration/instrument/telescope/optics',
 +
'configuration/instrument/telescope/optics.__table_column_meta__',
 +
'dl1/event/telescope/monitoring/calibration',
 +
'dl1/event/telescope/monitoring/flatfield',
 +
'dl1/event/telescope/monitoring/pedestal',
 +
'dl2/event/telescope/parameters/LST_LSTCam']
 +
</pre>
 +
<pre style="color: blue">
 +
dl1_file = "/fefs/aswg/data/real/DL1/20210903/v0.7.3/tailcut84/dl1_LST-1.Run05998.0000.h5"
 +
get_dataset_keys(dl1_file)
 +
</pre>
 +
<pre>
 +
Out[]:
 +
['configuration/instrument/subarray/layout',
 +
'configuration/instrument/subarray/layout.__table_column_meta__',
 +
'configuration/instrument/telescope/camera/geometry_LSTCam',
 +
'configuration/instrument/telescope/camera/geometry_LSTCam.__table_column_meta__',
 +
'configuration/instrument/telescope/camera/readout_LSTCam',
 +
'configuration/instrument/telescope/camera/readout_LSTCam.__table_column_meta__',
 +
'configuration/instrument/telescope/optics',
 +
'configuration/instrument/telescope/optics.__table_column_meta__',
 +
'dl1/event/telescope/image/LST_LSTCam',
 +
'dl1/event/telescope/monitoring/calibration',
 +
'dl1/event/telescope/monitoring/flatfield',
 +
'dl1/event/telescope/monitoring/pedestal',
 +
'dl1/event/telescope/parameters/LST_LSTCam']
 +
</pre>
 +
Data is in the tables:
 +
* 'dl1/event/telescope/image/LST_LSTCam' (camera calibrated images)
 +
* 'dl1/event/telescope/parameters/LST_LSTCam' (Hillas parameters, timestamps, pointing, etc)
 +
In case of DL2 only the table parameters 'dl2/event/telescope/parameters/LST_LSTCam' are available, which is a copy of the DL1 table with the reconstructed parameters added
 +
 
 +
To access the parameter tables in DL1 and DL2:
 
<pre style="color: blue">
 
<pre style="color: blue">
git clone https://github.com/cta-observatory/ctapipe.git
+
dl2_dataframe = pd.read_hdf(file, key=dl2_params_lstcam_key)
cd ctapipe
+
dl2_dataframe
 +
</pre>
 +
<pre>
 +
Out[]:  
 +
      obs_id  event_id      intensity  log_intensity        x        y        r      phi    length  ...  reco_energy  reco_disp_dx  reco_disp_dy  reco_src_x  reco_src_y  reco_alt  reco_az  reco_type  gammaness
 +
0        5998        1    5529.521235      3.742688 -0.032178 -0.020007  0.037890 -2.585328  1.168153  ...    12.028581    -1.395368    -0.322723  -1.427546  -0.342730  1.084904  0.228667        101  0.025000
 +
1        5998        4      61.694788      1.790248  0.093973  0.365420  0.377309  1.319085  0.045765  ...    0.021868      0.033724      0.019880    0.127698    0.385300  1.140388  0.287830        101  0.056333
 +
2        5998        5    131.579536      2.119188  0.242024  0.147060  0.283200  0.546006  0.123974  ...    0.114741      0.246228    -0.281001    0.488253  -0.133941  1.153445  0.243046        101  0.188333
 +
3        5998        6      37.598133      1.575166  0.405366 -0.546641  0.680542 -0.932721  0.072361  ...    0.062491      0.011559    -0.049816    0.416924  -0.596457  1.150419  0.202634        101  0.290833
 +
4        5998        7      75.891508      1.880193 -0.129859 -0.524562  0.540397 -1.813474  0.078325  ...    0.033458      0.010284      0.027173  -0.119575  -0.497389  1.131426  0.213075        101  0.165000
 +
...      ...      ...            ...            ...      ...      ...      ...      ...      ...  ...          ...          ...          ...        ...        ...      ...      ...        ...        ...
 +
28271    5998    52989      89.536526      1.952000 -0.775412  0.466715  0.905034  2.599783  0.061538  ...    0.043203    -0.004094      0.009934  -0.779506    0.476649  1.108024  0.292202        101  0.165000
 +
28272    5998    52990    113.433699      2.054742 -0.015224 -0.558476  0.558683 -1.598049  0.072026  ...    0.034507    -0.150657      0.088593  -0.165881  -0.469883  1.129934  0.214743        101  0.091000
 +
28273    5998    52991    3053.237697      3.484761  0.621141  0.404424  0.741198  0.577148  0.319016  ...    0.218918      0.064154    -0.829353    0.685294  -0.424929  1.160371  0.216046        101  0.010000
 +
28274    5998    52992  132592.328588      5.122518  0.000555  0.000571  0.000796  0.799391  1.163453  ...    30.287504    -0.286239      0.399654  -0.285684    0.400225  1.125740  0.287283        101  0.178036
 +
28275    5998    52997      74.290200      1.870932 -0.595926  0.781502  0.982788  2.222275  0.097937  ...    0.292780      0.711934      0.310702    0.116007    1.092203  1.138651  0.347324        101  0.442667
  
CTAPIPE_VER=0.10.5
+
[28276 rows x 51 columns]
wget https://raw.githubusercontent.com/cta-observatory/ctapipe/v$CTAPIPE_VER/environment.yml
+
</pre>
conda env create -n cta -f environment.yml
+
Accesing images is more complicated and requires the tables module
conda activate cta
+
<pre style="color: blue">
conda install -c conda-forge ctapipe=$CTAPIPE_VER
+
from astropy.table import Table
 +
images = Table.read(dl1_file, path=dl1_images_lstcam_key)['image']
 +
images
 +
</pre>
 +
<pre>
 +
Out[]:
 +
<Column name='image' dtype='float32' shape=(1855,) length=53000>
 +
    8.701056 .. 7.1084614
 +
  3.7857776 .. 1.2068052
 +
  3.8285189 .. 0.9846253
 +
  4.5408783 .. 5.1921587
 +
    4.754586 .. 1.026284
 +
  0.7226335 .. 0.09590531
 +
  3.4738295 .. 2.0677526
 +
2.8597107 .. -0.43177217
 +
-0.20343336 .. 3.8313065
 +
  1.3372487 .. 1.5678478
 +
    3.2301373 .. 2.428795
 +
  3.4438455 .. 4.2895527
 +
    3.871757 .. 1.4984165
 +
  -0.5311186 .. 1.8316865
 +
    2.717239 .. 4.3192797
 +
  1.3362556 .. 0.48472026
 +
0.52366954 .. 0.26254028
 +
1.7769248 .. -0.06901258
 +
  2.6032615 .. 3.2203112
 +
  1.7484305 .. 1.8331614
 +
  4.7545853 .. 1.7067102
 +
  2.2185874 .. 1.2590411
 +
-0.43089166 .. 0.29031274
 +
  2.7479038 .. 1.5956203
 +
                      ...
 
</pre>
 
</pre>
 +
for each of the 53000 events, a calibrated image of the camera is obtained (array of 1855 pixels)
 +
 +
The rest of the tables in the files are metadata (info about the camera, optics, calibration, etc)
 +
 +
== Software tool installation ==
 +
  
== Analysis of LST1 data ==
+
 
 +
=== LSTCHAIN ===
 
Donwload LST analysis software cta-lstchain (wrapper that uses centrally supported ctapipe routines)
 
Donwload LST analysis software cta-lstchain (wrapper that uses centrally supported ctapipe routines)
 
<pre style="color: blue">
 
<pre style="color: blue">
Line 40: Line 251:
 
conda install -c conda-forge -n base mamba
 
conda install -c conda-forge -n base mamba
 
mamba env create -f environment.yml
 
mamba env create -f environment.yml
 
 
</pre>
 
</pre>
  
Line 47: Line 257:
 
* Low level DRS4 calibration: calibration.hdf5
 
* Low level DRS4 calibration: calibration.hdf5
  
=== Run directly jupyter notebook ===
+
==== Run directly jupyter notebook ====
 
<pre style="color: blue">
 
<pre style="color: blue">
 
cd cta-lstchain/notebooks
 
cd cta-lstchain/notebooks
Line 54: Line 264:
 
</pre>
 
</pre>
  
=== Convert example jupyter notebook to python  ===
+
==== Convert example jupyter notebook to python  ====
 
<pre style="color: blue">
 
<pre style="color: blue">
 
cd cta-lstchain/notebooks
 
cd cta-lstchain/notebooks
Line 70: Line 280:
 
</pre>
 
</pre>
  
== Ctools ==
+
=== Gammapy ===
 +
 
 +
<pre style="color: blue">
 +
curl -O https://gammapy.org/download/install/gammapy-0.18.2-environment.yml
 +
conda env create -f gammapy-0.18.2-environment.yml
 +
conda activate gammapy-0.18.2
 +
gammapy info
 +
 
 +
##### Installing local copy
 +
git clone  -b v0.18.2 https://github.com/gammapy/gammapy
 +
cd gammapy
 +
pip install -e .
 +
 
 +
</pre>
 +
Installation in Ubuntu
 +
<pre style="color: red">
 +
conda create -n gammapyenv python=3.7
 +
conda activate gammapyenv
 +
conda install gammapy=0.18.2 sherpa=4.12.0
 +
conda install jupyter ipython jupyterlab pandas healpy iminuit naima emcee corner parfice
 +
gammapy info
 +
</pre>
 +
 
 +
=== Ctools ===
 +
Installation MAC
 +
<pre style="color: blue">
 +
conda config --append channels conda-forge
 +
conda config --append channels cta-observatory
 +
conda create -n ctathai python=3.8
 +
conda activate ctathai
 +
conda install ctools
 +
conda install matplotlib
 +
conda install jupyterlab
 +
export CALDB=/path/where/you/installed/IRF/caldb
 +
export HESSDATA=/path/where/you/installed/HESS/data
 +
</pre>
 +
 
 +
Installation UBUNTU
 +
<pre style="color: blue">
 +
conda create -n ctathai python=3.7
 +
conda activate ctathai
 +
conda install -c cta-observatory ctools=1.7.4
 +
conda install matplotlib
 +
conda install jupyterlab
 +
export CALDB=/path/where/you/installed/IRF/caldb
 +
export HESSDATA=/path/where/you/installed/HESS/data
 +
</pre>
 +
 
 +
 
 +
Commands:
 
<pre style="color: blue">
 
<pre style="color: blue">
 
ctobssim  edisp=yes
 
ctobssim  edisp=yes
Line 87: Line 346:
 
</pre>
 
</pre>
  
 +
=== Fermipy ===
 +
<pre style="color: blue">
 +
conda config --append channels fermi
 +
conda create -n fermiset -c conda-forge -c fermi fermitools=2.0.8 python=3.7 clhep=2.4.4.1
 +
conda activate fermiset
 +
conda install fermipy
 +
</pre>
 +
 +
=== CTApipe ===
 +
<pre style="color: blue">
 +
git clone https://github.com/cta-observatory/ctapipe.git
 +
cd ctapipe
 +
 +
CTAPIPE_VER=0.10.5
 +
wget https://raw.githubusercontent.com/cta-observatory/ctapipe/v$CTAPIPE_VER/environment.yml
 +
conda env create -n cta -f environment.yml
 +
conda activate cta
 +
conda install -c conda-forge ctapipe=$CTAPIPE_VER
 +
</pre>
 +
 +
=== Ubuntu 20.04 issues ===
  
== Fermipy ==
+
* Mars/root does not work so gcc needs to be downgrade to version 5: [https://askubuntu.com/questions/1235819/ubuntu-20-04-gcc-version-lower-than-gcc-7 gcc downgrade]
 +
* System Program Problem Detected at reboot:
 +
<pre style="color: blue">
 +
sudo gedit /etc/default/apport
 +
enabled=0
 +
</pre>
 +
* Problem installing ctools with conda, modify ~/.condarc
 
<pre style="color: blue">
 
<pre style="color: blue">
conda config --append channels fermi
+
channel_priority: flexible
conda env create --name fermipy -c conda-forge -c fermi python=3.7 fermitools=2.0.8
+
</pre>
 +
 
 +
 
 +
== Extra ==
 +
 
 +
=== Conda useful commands ===
  
 +
<pre>
 +
conda remove --name gammapy_default --all
 +
conda list -n gammapy-0.18.2
 
</pre>
 
</pre>
 +
 +
=== MAGIC DL3 data ===
 +
https://github.com/open-gamma-ray-astro/joint-crab/tree/master/data/magic
 +
 +
https://gitlab.pic.es/magic_dl3/magic_dl3_sw_school_2021/-/tree/master/data/magic
 +
 +
=== Notebook examples ===
 +
https://github.com/rlopezcoto/intro-iact-analysis

Latest revision as of 10:13, 16 February 2022

MVA Analysis pages[edit]

Location of LST1 data at PIC[edit]

Use CTA observatory LDAP account (eg: monica.vazquez)

Location of LST1 data at La Palma[edit]

  • Directory: /fefs/onsite/data
    Use cp01/cp02 to copy out data, never the login machine
  • Latest IRF
    /fefs/aswg/data/mc/IRF/20200629_prod5_trans_80/zenith_20deg/south_pointing/20210923_v0.7.5_prod5_trans_80_dynamic_cleaning/off0.4deg/irf_20210923_v075_prod5_trans_80_dynamic_cleaning_gamma_point-like_off04deg.fits.gz

LST1 School 2022[edit]

https://www.lst1.iac.es/wiki/index.php/LST1School2021_MVA

LST1 DL2/DL3 Data[edit]

  • Crab DL3
    Location: /fefs/aswg/workspace/daniel.morcuende/data/real/DL3/20201120/v0.7.3/tailcut84/
    • dl3_LST-1.RunXXX.fits.gz
    • hdu-index.fits.gz
    • obs-index.fits.gz
  • Crab DL2 with dynamic cleaning & MC (tuned NSB & PSF - ICRC version)
    Location: /fefs/aswg/workspace/abelardo.moralejo/Crab_tuned_MC_20210924/20201120/merged/DL2/
    • dl2_LST-1.Run029*h5
    • dl2_merged.h5


  • Check DL2 data: RF models & config
cd /fefs/aswg/data/real/DL2/20220206/v0.8.4/tailcut84/log

cat sequencer_v0.8.4.cfg 

** CONFIGURATION:

dl1ab_config: /fefs/aswg/lstosa/lstchain_config_v083_tailcut84.json
# In principle both config files should be the same, but in case
# the MC DL2 uses a different config file, it can be set here.
# For testing purposes
dl2_config: /fefs/aswg/lstosa/lstchain_config_v083_tailcut84.json

** MODELS:
rf_models: /fefs/aswg/workspace/abelardo.moralejo/Crab_tuned_MC_20211231/MC/DL1b_tuned/training/models

DL2toDL3 conversion[edit]

General talk on the LST1 DL3 Tools by Chaitanya Priyadarshi: DL3_Tools_and_Spectral_analysis_of_Crab_data_with_gammapy.pdf

DL2toDL3 Tools[edit]

Tools are located in lstchain/tools:

  • lstchain_create_irf_file: create IRFs from the MC file
    • The IRFs can be generated using only the gamma MC file, to produce Effective Area, Energy Dispersion
      (and PSF for Full Enclosure IRFs, ie. without any theta cuts).
    • Proton and Electron MC are used to create the Background IRF.
    • For creating point-like IRFs, you have to pass
      the --point-like flag in the command-line, as by default the Tools generates a Full Enclosure IRF.
  • lstchain_create_dl3_file: create DL3 files
  • lstchain_create_dl3_index_files: generate HDU and OBS Index files of the DL3 files created.
    The DL3 files are indexed as per GADF and using ctapipe tools

Command options can be checked: lstchain_create_irf_file --help-all

DL2 Cuts[edit]

Fixed cut variables & default values (see here)

  • fixed_gh_cut [0.6]
  • fixed_theta_cut [0.2]
  • allowed_tels [1]

Cut Methods:

  1. --fixed-gh-cut 0.9
  2. --config /path/to/config.json
    Example json config files for the DL3 tools are here
    The DL3 JSON config file (dl3_tool_config.json) is a subset of the IRF config file (irf_tool_config.json).
    One can use the IRF config file for both tools to ensure that the same filter cuts for both MC and real data are used.

NOTE: the fixed_theta_cut option is not available in lstchain_create_dl3_file, so it is better to use the JSON option to be consistent with the IRF generation

Example DL2toDL3 commands[edit]

lstchain_create_irf_files
        -g /path/to/DL2_MC_gamma_file.h5
        -o /path/to/irf.fits.gz
        --point-like (Only for point_like IRFs)
        --fixed-gh-cut 0.9
        --fixed-theta-cut 0.2
        --irf-obs-time 50

lstchain_create_dl3_file
        -d /path/to/DL2_data_file.h5
        -o /path/to/DL3/file/
        --input-irf /path/to/irf.fits.gz
        --source-name Crab
        --source-ra 83.633deg
        --source-dec 22.01deg
        --fixed-gh-cut 0.9

lstchain_create_dl3_index_files
        -d /path/to/DL3/files/
        -o /path/to/DL3/index/files
        -p dl3*[run_1-run_n]*.fits.gz

Example DL2toDL3 commands - MVA specific[edit]

lstchain_create_irf_files -g /Users/monicava/LST1_DATA/Abelardo/dl2_merged.h5 -o /Users/monicava/LST1_DATA/Abelardo/irf.gh01.fits.gz --point-like --config irf_tool_config_gh01.json --irf-obs-time 50
lstchain_create_dl3_file -d /Users/monicava/LST1_DATA/Abelardo/dl2_LST-1.Run02967.h5 -o /Users/monicava/LST1_DATA/Abelardo/DL3_gh01 --input-irf /Users/monicava/LST1_DATA/Abelardo/irf.gh01.fits.gz --source-name Crab --source-ra 83.633deg --source-dec 22.01deg --config irf_tool_config_gh01.json
lstchain_create_dl3_index_files -d /Users/monicava/LST1_DATA/Abelardo/DL3_gh01 

Run summary info/data-check[edit]

LST1 data formats[edit]

File content can be obtained as follows:

from lstchain.io import get_dataset_keys
from lstchain.io.io import dl1_params_lstcam_key, dl2_params_lstcam_key, dl1_images_lstcam_key
dl2_file = "/fefs/aswg/data/real/DL2/20210903/v0.7.3/tailcut84/dl2_LST-1.Run05998.0000.h5"
import pandas as pd
get_dataset_keys(dl2_file)
Out[]: 
['configuration/instrument/subarray/layout',
 'configuration/instrument/subarray/layout.__table_column_meta__',
 'configuration/instrument/telescope/camera/geometry_LSTCam',
 'configuration/instrument/telescope/camera/geometry_LSTCam.__table_column_meta__',
 'configuration/instrument/telescope/camera/readout_LSTCam',
 'configuration/instrument/telescope/camera/readout_LSTCam.__table_column_meta__',
 'configuration/instrument/telescope/optics',
 'configuration/instrument/telescope/optics.__table_column_meta__',
 'dl1/event/telescope/monitoring/calibration',
 'dl1/event/telescope/monitoring/flatfield',
 'dl1/event/telescope/monitoring/pedestal',
 'dl2/event/telescope/parameters/LST_LSTCam']
dl1_file = "/fefs/aswg/data/real/DL1/20210903/v0.7.3/tailcut84/dl1_LST-1.Run05998.0000.h5"
get_dataset_keys(dl1_file)
Out[]: 
['configuration/instrument/subarray/layout',
 'configuration/instrument/subarray/layout.__table_column_meta__',
 'configuration/instrument/telescope/camera/geometry_LSTCam',
 'configuration/instrument/telescope/camera/geometry_LSTCam.__table_column_meta__',
 'configuration/instrument/telescope/camera/readout_LSTCam',
 'configuration/instrument/telescope/camera/readout_LSTCam.__table_column_meta__',
 'configuration/instrument/telescope/optics',
 'configuration/instrument/telescope/optics.__table_column_meta__',
 'dl1/event/telescope/image/LST_LSTCam',
 'dl1/event/telescope/monitoring/calibration',
 'dl1/event/telescope/monitoring/flatfield',
 'dl1/event/telescope/monitoring/pedestal',
 'dl1/event/telescope/parameters/LST_LSTCam']

Data is in the tables:

  • 'dl1/event/telescope/image/LST_LSTCam' (camera calibrated images)
  • 'dl1/event/telescope/parameters/LST_LSTCam' (Hillas parameters, timestamps, pointing, etc)

In case of DL2 only the table parameters 'dl2/event/telescope/parameters/LST_LSTCam' are available, which is a copy of the DL1 table with the reconstructed parameters added

To access the parameter tables in DL1 and DL2:

dl2_dataframe = pd.read_hdf(file, key=dl2_params_lstcam_key)
dl2_dataframe
Out[]: 
       obs_id  event_id      intensity  log_intensity         x         y         r       phi    length  ...  reco_energy  reco_disp_dx  reco_disp_dy  reco_src_x  reco_src_y  reco_alt   reco_az  reco_type  gammaness
0        5998         1    5529.521235       3.742688 -0.032178 -0.020007  0.037890 -2.585328  1.168153  ...    12.028581     -1.395368     -0.322723   -1.427546   -0.342730  1.084904  0.228667        101   0.025000
1        5998         4      61.694788       1.790248  0.093973  0.365420  0.377309  1.319085  0.045765  ...     0.021868      0.033724      0.019880    0.127698    0.385300  1.140388  0.287830        101   0.056333
2        5998         5     131.579536       2.119188  0.242024  0.147060  0.283200  0.546006  0.123974  ...     0.114741      0.246228     -0.281001    0.488253   -0.133941  1.153445  0.243046        101   0.188333
3        5998         6      37.598133       1.575166  0.405366 -0.546641  0.680542 -0.932721  0.072361  ...     0.062491      0.011559     -0.049816    0.416924   -0.596457  1.150419  0.202634        101   0.290833
4        5998         7      75.891508       1.880193 -0.129859 -0.524562  0.540397 -1.813474  0.078325  ...     0.033458      0.010284      0.027173   -0.119575   -0.497389  1.131426  0.213075        101   0.165000
...       ...       ...            ...            ...       ...       ...       ...       ...       ...  ...          ...           ...           ...         ...         ...       ...       ...        ...        ...
28271    5998     52989      89.536526       1.952000 -0.775412  0.466715  0.905034  2.599783  0.061538  ...     0.043203     -0.004094      0.009934   -0.779506    0.476649  1.108024  0.292202        101   0.165000
28272    5998     52990     113.433699       2.054742 -0.015224 -0.558476  0.558683 -1.598049  0.072026  ...     0.034507     -0.150657      0.088593   -0.165881   -0.469883  1.129934  0.214743        101   0.091000
28273    5998     52991    3053.237697       3.484761  0.621141  0.404424  0.741198  0.577148  0.319016  ...     0.218918      0.064154     -0.829353    0.685294   -0.424929  1.160371  0.216046        101   0.010000
28274    5998     52992  132592.328588       5.122518  0.000555  0.000571  0.000796  0.799391  1.163453  ...    30.287504     -0.286239      0.399654   -0.285684    0.400225  1.125740  0.287283        101   0.178036
28275    5998     52997      74.290200       1.870932 -0.595926  0.781502  0.982788  2.222275  0.097937  ...     0.292780      0.711934      0.310702    0.116007    1.092203  1.138651  0.347324        101   0.442667

[28276 rows x 51 columns]

Accesing images is more complicated and requires the tables module

from astropy.table import Table
images = Table.read(dl1_file, path=dl1_images_lstcam_key)['image']
images
Out[]: 
<Column name='image' dtype='float32' shape=(1855,) length=53000>
    8.701056 .. 7.1084614
   3.7857776 .. 1.2068052
   3.8285189 .. 0.9846253
   4.5408783 .. 5.1921587
     4.754586 .. 1.026284
  0.7226335 .. 0.09590531
   3.4738295 .. 2.0677526
 2.8597107 .. -0.43177217
 -0.20343336 .. 3.8313065
   1.3372487 .. 1.5678478
    3.2301373 .. 2.428795
   3.4438455 .. 4.2895527
    3.871757 .. 1.4984165
  -0.5311186 .. 1.8316865
    2.717239 .. 4.3192797
  1.3362556 .. 0.48472026
 0.52366954 .. 0.26254028
 1.7769248 .. -0.06901258
   2.6032615 .. 3.2203112
   1.7484305 .. 1.8331614
   4.7545853 .. 1.7067102
   2.2185874 .. 1.2590411
-0.43089166 .. 0.29031274
   2.7479038 .. 1.5956203
                      ...

for each of the 53000 events, a calibrated image of the camera is obtained (array of 1855 pixels)

The rest of the tables in the files are metadata (info about the camera, optics, calibration, etc)

Software tool installation[edit]

LSTCHAIN[edit]

Donwload LST analysis software cta-lstchain (wrapper that uses centrally supported ctapipe routines)

git clone https://github.com/cta-observatory/cta-lstchain.git
cd cta-lstchain

LSTCHAIN_VER=0.7.2
wget https://raw.githubusercontent.com/cta-observatory/cta-lstchain/v$LSTCHAIN_VER/environment.yml
conda env create -n lst -f environment.yml
conda activate lst
pip install lstchain==$LSTCHAIN_VER
rm environment.yml

In case of problems with conda env try mamba:
conda install -c conda-forge -n base mamba
mamba env create -f environment.yml

Files needed to analyze golden Run 442 (20190527):

  • Pedestal run: pedestal_file_run446_0000.fits
  • Low level DRS4 calibration: calibration.hdf5

Run directly jupyter notebook[edit]

cd cta-lstchain/notebooks
jupyter notebook
-> select Analyze_real_muon_data.ipynb

Convert example jupyter notebook to python[edit]

cd cta-lstchain/notebooks
jupyter nbconvert --to python Analyze_real_muon_data.ipynb

Fix path of data, pedestal and calibration and run!

Lines to fix:
source = event_source(input_url="../data/LST-1.4.Run00442.0001.fits.fz",max_events=None)
pedestal_path="../pedestal/pedestal_file_run446_0000.fits",
with HDF5TableReader('../calibration/calibration.hdf5') as h5_table:

python Analyze_real_muon_data.py

Gammapy[edit]

curl -O https://gammapy.org/download/install/gammapy-0.18.2-environment.yml
conda env create -f gammapy-0.18.2-environment.yml
conda activate gammapy-0.18.2
gammapy info

##### Installing local copy
git clone  -b v0.18.2 https://github.com/gammapy/gammapy
cd gammapy
pip install -e .

Installation in Ubuntu

conda create -n gammapyenv python=3.7
conda activate gammapyenv
conda install gammapy=0.18.2 sherpa=4.12.0
conda install jupyter ipython jupyterlab pandas healpy iminuit naima emcee corner parfice
gammapy info

Ctools[edit]

Installation MAC

conda config --append channels conda-forge
conda config --append channels cta-observatory
conda create -n ctathai python=3.8
conda activate ctathai
conda install ctools
conda install matplotlib
conda install jupyterlab
export CALDB=/path/where/you/installed/IRF/caldb
export HESSDATA=/path/where/you/installed/HESS/data

Installation UBUNTU

conda create -n ctathai python=3.7
conda activate ctathai
conda install -c cta-observatory ctools=1.7.4
conda install matplotlib
conda install jupyterlab
export CALDB=/path/where/you/installed/IRF/caldb
export HESSDATA=/path/where/you/installed/HESS/data


Commands:

ctobssim  edisp=yes
fv events.fits
ctskymap 
ds9 skymap.fits 
ctbin
fv cntcube.fits 
ctexpcube
ctpsfcube
ctbkgcube
ctlike
csresmap
csresspec components=yes
$CTOOLS/share/examples/python/show_residuals.py resspec.fits

Fermipy[edit]

conda config --append channels fermi
conda create -n fermiset -c conda-forge -c fermi fermitools=2.0.8 python=3.7 clhep=2.4.4.1
conda activate fermiset
conda install fermipy

CTApipe[edit]

git clone https://github.com/cta-observatory/ctapipe.git
cd ctapipe

CTAPIPE_VER=0.10.5
wget https://raw.githubusercontent.com/cta-observatory/ctapipe/v$CTAPIPE_VER/environment.yml
conda env create -n cta -f environment.yml
conda activate cta
conda install -c conda-forge ctapipe=$CTAPIPE_VER

Ubuntu 20.04 issues[edit]

  • Mars/root does not work so gcc needs to be downgrade to version 5: gcc downgrade
  • System Program Problem Detected at reboot:
sudo gedit /etc/default/apport 
enabled=0
  • Problem installing ctools with conda, modify ~/.condarc
channel_priority: flexible


Extra[edit]

Conda useful commands[edit]

conda remove --name gammapy_default --all
conda list -n gammapy-0.18.2

MAGIC DL3 data[edit]

https://github.com/open-gamma-ray-astro/joint-crab/tree/master/data/magic

https://gitlab.pic.es/magic_dl3/magic_dl3_sw_school_2021/-/tree/master/data/magic

Notebook examples[edit]

https://github.com/rlopezcoto/intro-iact-analysis