Difference between revisions of "Fast Offline Analysis OP186 May 2024 P065"
Line 16: | Line 16: | ||
==Data-taking information== | ==Data-taking information== | ||
* '''Dates of data-taking''': | * '''Dates of data-taking''': | ||
− | ** Date: 2024-05-30 ( h) | + | ** Date: 2024-05-30 (0.739 h) |
***ZD range (deg): 12 - 18 | ***ZD range (deg): 12 - 18 | ||
***Observations: | ***Observations: |
Revision as of 17:35, 31 May 2024
Contents
Fast offline analysis OP186 May2024 P065
General information
- Name of the source: OP186
- Brief description of the source:
- Object type : BLLac
- Redshift (z) : 0.8
- Other relevant information
- RA: 13 53 22.83 (hh mm ss), Dec: +14 35 39.2 (dd mm ss)
- RA, Dec in deg (ICRS): 208.35 , 14.59
- Analysis by:
- Juan Bernete (CIEMAT - juan.bernete@ciemat.es)
Data-taking information
- Dates of data-taking:
- Date: 2024-05-30 (0.739 h)
- ZD range (deg): 12 - 18
- Observations:
- Date: 2024-05-30 (0.739 h)
2024-05-28: [17517, 17518, 17519, 17520]
- Data quality selection: 17517 and 17518 survive the data quality selection, but the analysis is performed with all the runs as they are not so bad.
- Joint observations with MAGIC?: No
- Information on data-taking (observations summaries): Run 17520 was interrupted just after started
General analysis information
- source-independent analysis
- lstchain version: v0.10.11
- DL1b standard production (v0.10/tailcut84), run-wise merged files in:
/fefs/aswg/data/real/DL1/YYYYMMDD/v0.10/tailcut84/dl1_LST-1.Run?????.h5
Monte Carlo information
Write below the MC production ID among the existing MC
- All-sky MC production used: 20240131_allsky_v0.10.5_all_dec_base
- Declination line (training): dec_931
Random forest
Path to the models used:
/fefs/aswg/data/models/AllSky/20240131_allsky_v0.10.5_all_dec_base/dec_931
DL2 data
Config file:
Files in:
/fefs/aswg/workspace/juan.bernete/fastanalysis/OP186/DL2
DL3 data & IRF
"EventSelector": { "filters": { "intensity": [50, Infinity], "width": [0, Infinity], "length": [0, Infinity], "r": [0, 1], "wl": [0.01, 1], "leakage_intensity_width_2": [0, 1], "event_type": [32, 32] } }, "DL3Cuts": { "min_event_p_en_bin": 100, "min_gh_cut": 0.1, "max_gh_cut": 0.95, "min_theta_cut": 0.0, "max_theta_cut": 0.2, "fill_theta_cut": 0.2, "allowed_tels": [1] },
- 70 % efficiency for both gammaness and theta gamma-ray selection cuts
- Point-like IRF
High-level analysis and results
Analysis settings
- Gammapy version: 1.1
- 1D analysis (point-like IRF)
Theta2 plot
Settings:
- Theta2 cut for signal extraction: 0.04 deg2
- Normalization range: 0.1 - 0.4 deg2
- Number of off positions: 3
- Energy range: 0.01 - 10 TeV
Daily results
- 2024-05-30: No detection