Difference between revisions of "Logbook Optics-Setup-Mirca-Apr2018"

Revision as of 11:56, 10 April 2018

Date	Who did it?	Action	Comments
2018-04-09	Koji, Satoshi	CMOS camera setup	We finished attaching CMOS holders for all the 198 cameras. We started camera angle adjustment and finished 17.
2018-04-08	Koji, Satoshi	CMOS camera setup	We put loctite on screws of the lens mount for all the 198 cameras. Then we started attaching CMOS holders and finished ~100. We also made a setup for CMOS angle adjustment.
2018-04-07	Satoshi	CMOS camera setup	I finished labeling, adjusting lens, IP configuration and IP address table for 198 CMOS cameras.
2018-04-06	Satoshi	arrival in La Palma

2018/04/07

We had one camera (1/198) which could not be connected from AMC PC.

2018/04/07

- When adjusting lens, we put loctite on pins for focus, but not for pins for iris.

2018/04/08

- CMOS camera shields are very tight. We cannot screw some of them completely. In that case you can make use of a CMOS holder to fix them tightly.

- Put loctite on screws of lens mount slowly otherwise loctite can be sticked on the lenses or CMOS sensors.

@@ Line 6: / Line 6: @@
 |- valign="top"
+|-
+| 2018-04-09 || Koji, Satoshi || CMOS camera setup || We finished attaching CMOS holders for all the 198 cameras. We started camera angle adjustment and finished 17. ||
 |-
 | 2018-04-08 || Koji, Satoshi || CMOS camera setup || We put loctite on screws of the lens mount for all the 198 cameras. Then we started attaching CMOS holders and finished ~100. We also made a setup for CMOS angle adjustment. ||