Difference between revisions of "Logbook MirrorInstall"
(→Enter comments in reverse time order) |
|||
Line 6: | Line 6: | ||
|- valign="top" | |- valign="top" | ||
+ | |- | ||
| 2018-05-11 ||Koji, Tomohiro, Toni, CaSana || Mirror Transportation || Today we finished to install 24 mirrors on the structure (in total 123). In the middle of the installation, we hit the bottom edge of a mirror to the bottom of the cradle. It made a small crack(1cm×1cm) on the surface of the mirror. We stooped the installing that one and installed after we put the silicone for repairing.It located in (-4,-6) After we hit the mirror to the bottom of the cradle, we put the soft material to that region for protecting a surface of mirrors. <br>|| | | 2018-05-11 ||Koji, Tomohiro, Toni, CaSana || Mirror Transportation || Today we finished to install 24 mirrors on the structure (in total 123). In the middle of the installation, we hit the bottom edge of a mirror to the bottom of the cradle. It made a small crack(1cm×1cm) on the surface of the mirror. We stooped the installing that one and installed after we put the silicone for repairing.It located in (-4,-6) After we hit the mirror to the bottom of the cradle, we put the soft material to that region for protecting a surface of mirrors. <br>|| | ||
[[File:MirrorInstallation20180511.jpg|200px|Image: 200 pixels]] | [[File:MirrorInstallation20180511.jpg|200px|Image: 200 pixels]] |
Revision as of 16:26, 11 May 2018
Enter comments in reverse time order
Trouble Shooting
- 2018/05/11
- After we hit the mirror to the bottom of the cradle, we put the soft material to that region for protecting a surface of mirrors.
- 2018/04/28
- While inserting a safety bolt, we damaged a little the edge of the hole. We kept this mirror today and will attach silicon paint the next working day.
- We found one fixed point which has one hole just above a sticking part of the hose band. We replaced with a new fixed point as we could not insert a bolt to that hole.
- 2018/04/26
- When Casana people tried to install one mirror, they realized a big nut did not fit the fixed point and they could not fix the fixed point. It may have happened in the dish when trying to fix the nut. We solved this problem quickly by replacing the fixed point with a new one. Still, we check if a nut fits well a fixed point of a mirror to be installed before attaching it to the cherry picker.
- Sometimes it is very hard to insert safety bolts because of glue and a tape inside the hole. We solved by using a small hammer and a small screwdriver which Holger suggested to us to use to remove glue or tape.