Logbook AMCCommissioning ORM NovDec
Revision as of 00:05, 6 November 2018 by Satoshifukami (talk | contribs) (→Enter comments in reverse time order)
Enter comments in reverse time order
| Date | Who did it? | Action | Comments | Documents |
|---|---|---|---|---|
| 2018-11-05 | Satoshi | Actuator software improvement | I implemented functions for relative shift of actuators ('R/L/r/l' commands) besides absolute shift ('P' command) and made it work. | |
| 2018-11-03 | Satoshi | CMOS camera image inspection | I kept all the CMOS cameras of one group (group 1) taking images for the whole night. I checked these images again, and confirmed all of the images are now clear. The reason of blurred images is water and this problem can be solved by working cameras heavily. | |
| 2018-11-02 | Satoshi | CMOS camera image inspection | I checked images of some cameras again and compared with the ones yesterday. I noticed that for some cameras images became clear. What is on the entrance windows should be water, and it evaporated within one day. | |
| 2018-11-01 | Satoshi | CMOS camera image inspection | I checked images of all the cameras. There are 5 which cannot be seen. ~2/3 of 200 cameras have obscure images. As far as looking at cameras at the bottom, something like water drop is seen on front windows. | |
| 2018-10-30 | Daniel, Eduardo, Satoshi | Replacement of XBees of bad actuators | Daniel and Eduardo climbed up in the dish to replace XBees of 9 actuators which are not seen from the beginning. We found the XBees inside the actuators are deformed. |
