GRB210511B
Revision as of 09:01, 27 January 2022 by Davidsanchez (talk | contribs)
Go back to Transient observation logbook.
Contents
Status[edit]
Step | Status | Comment |
---|---|---|
DL2 Production | Done | |
Low Level Check | Done | |
DL3 Production | Done | |
High Level Analysis | To do | For spectral results, waiting full sky IRF |
Green color code : 00BA00 Red Color code : FF0000
Multi-wavelength Observations[edit]
T0+ | Instrument | Outcome | Outcome specific value (flux/UL/...) | Comment | Link |
---|---|---|---|---|---|
- | Initial detection | ||||
UL | |||||
Detection |
Alert[edit]
- Triggered by: Fermi GBM
- Alert coordinates: 21h 04m 43s, +61d 41' 24" (J2000), 316.18, 61.69 (deg)
- Alert arrival time: 2021-05-11 11:36:02 UTC
- Additional info: alert didn't pass the TH filtering criteria, because start of observation was more than 4h from the trigger time
LST Observations[edit]
- Delay: 970min
- Overall observation time:
- Observation mode: std wobbles
- Observed source position: 316.18 deg, 61.69 deg
- Observation condition: dark
- Zenith range: 38 - 46 deg
- ELOG link: elog 1684
- Important comments: several spikes in the rates during all runs
- Run list :
RunNumber | Start date | Stop date | Drive target name | RA | Dec | Observation condition |
---|---|---|---|---|---|---|
4718 | 2021-05-12 05:37:59 | 2021-05-12 05:55:00 | GRB210511B | 316.179 | 62.09 | dark |
4719 | 2021-05-12 05:57:00 | 2021-05-12 06:16:59 | GRB210511B | 316.179 | 61.29 | dark |
4720 | 2021-05-12 06:19:12 | 2021-05-12 06:35:13 | GRB210511B | 317.023 | 61.6874 | dark |
4721 | 2021-05-12 06:38:14 | 2021-05-12 06:58:14 | GRB210511B | 315.336 | 61.6874 | dark |
Low level check[edit]
Run xxxxxx : pdf file low level check
Run xxxxxx : pdf file low level check
Run xxxxxx : pdf file low level check
Run xxxxxx : pdf file low level check
Upload low level check plots and comment possible issue and action taken
High Level Analysis[edit]
Analysis configuration[edit]
- Name and contact info of the analyzer: Mathieu de Bony
- Software versions:
- Cuts and parameters used:
- DL2 MC data used:
- Overall selected observation time:
- Position analyzed: e.g., RA, DEC
- Analysis/data problems: