Logbook TestsCalibrationAtIAC-2017

From my_wiki
Revision as of 21:04, 9 August 2017 by Dnakajima (talk | contribs) (Enter comments in reverse time order)
Jump to: navigation, search

Enter comments in reverse time order

Date Who did it? Action Comments Documents
2017-08-07 Daisuke, Tsutomu, Riccardo Byte swap Here is the data header of the first event of one dragon event with the newest dragon firmware V5-1-0d
aaaa 0000 8c15 000f 0001 0000 0001 0000
4bcd 00cf 0000 0000 dddd dddd dddd dddd

Event/trigger numbers are both "0001 0000". Is this what we wanted?
In order to express 1,
Before : 0100 0000
After the byte swap (current situation) : 0001 0000
We thought it would have been: 0000 0001

2017-08-07 Daisuke, Tsutomu, Riccardo Cross Talk measurement In order to investigate cross talks, we prepared a mask to cover all modules except the central one. https://drive.google.com/open?id=0B6V4naKAxXfURmxzWjNNWExvU3M
2017-08-07 Dirk, Daisuke Tsutomu EVB Plots to demonstrate the importance of timeout duration, fast re-transmission option (still preliminary, more data points with slightly different condition will be added) https://drive.google.com/open?id=0B6V4naKAxXfUajN3X3FFbkYtNVU
2017-08-08 Dirk, Daisuke Tsutomu OPCUA Following host names added in /etc/hosts for convenience
 
10.1.0.54    okinawa-10g-1
10.1.11.201  okinawa-10g-2
10.1.12.201  okinawa-10g-3
10.1.0.250   okinawa-1g

10.1.0.83    tib
2017-08-08 Dirk, Daisuke Tsutomu OPCUA A small problem we found is reported https://forge.in2p3.fr/issues/20103
2017-08-08 Dirk, Daisuke Tsutomu Strange Triggers?? We can not reproduce the strange behaviour we saw yesterday... An email sent from Daisuke to the email thread [climate chamber at IAC]
2017-08-07 Dirk, Daisuke Tsutomu, Riccardo Additional Dragon setting wrb 0xFFFFFF10 3
(Enables fast re-transmission)

wrs 0xFFFFFF2E 1
(Set time-out duration to 1ms)
Temporally we are doing like as follows, but should be implemented in future in ClusCo.
for i in $(scanIP | \
awk '/Bee.Beans/ {print $1}')
do  
    rbcp $i 4660 << EoCommands
 rd 0xFFFFFF10 1
 wrb 0xFFFFFF10 3
 rd 0xFFFFFF10 1
 rd 0xFFFFFF2E 4
 wrs 0xFFFFFF2E 1
 rd 0xFFFFFF2E 4
 quit

EoCommands
    echo Done for $i

done
2017-08-07 Dirk, Daisuke Strange Triggers?? We discovered today that sometime module 14,15 and 18 created ~4 MHz of L1 external triggers by its own when temperature is high. Very strange behaviour, need to be investigated further. Attached are screenshots, we have injected periodic trigger at 1kHz, but only some modules got very high trigger rate. https://drive.google.com/open?id=0B6V4naKAxXfUTl8xcXR4VXYzY0k https://drive.google.com/open?id=0B6V4naKAxXfUeVdlNF9vLXlVZ1E
2017-08-07 Dirk, Daisuke Tsutomu, Riccardo EVB Implementation of OPC/UA https://drive.google.com/open?id=0B6V4naKAxXfUTnRJeWVYamV1bDg
2017-08-04 Dirk, Julien, Daisuke Tsutomu, Riccardo EVB Cold start Daisuke can start EVB from the beginning. HowToRunEVB
2017-08-04 Dirk, Julien, Daisuke Tsutomu, Riccardo EVB test Two 10GSFP+ links from the switch to the camera server. we could take up to 88 kHz periodic trigger!
2017-08-04 Dirk, Julien, Daisuke Tsutomu, Riccardo EVB test Throughput measurements with Random/Poisson triggers, FastRetransmission option, Timeout duration https://docs.google.com/spreadsheets/d/1hc_JQFFzJYI-o9oFybhmTCVDvkSL2t5UxaX7MgLj9qs/edit?usp=sharing
2017-08-03 Dirk, Julien, Daisuke Tsutomu, Riccardo EVB test Julien found an interesting SiTCP option :Fast retrains, second bit of the address 0xFFFFFF10. (Default is off). With this option re-transmission time is automatically optimised!
2017-08-03 Dirk, Julien, Daisuke Tsutomu, Riccardo EVB test We understood the SiTCP parameter for the timeout duration of re-transmission (0xFFFFFF2E). This should be optimised with respect to the real RTT
2017-08-03 Dirk, Julien, Daisuke Tsutomu, Riccardo EVB test Dragon buffer size consistent with Takayuki's report 88 events
2017-08-03 Dirk, Julien, Daisuke Tsutomu, Riccardo EVB test No event/trigger number mismatch both with periodic and poissonian triggers. TIB new firmware seems good
2017-08-02 Dirk, Julien, Daisuke Tsutomu, Riccardo EVB test Ramdisk installe, 2GB/s of writing speed
2017-08-02 Dirk, Julien, Daisuke Tsutomu, Riccardo see https://forge.in2p3.fr/issues/19976
2017-08-02 Dirk, Julien, Daisuke Tsutomu, Riccardo EVB test Closing procedure confirmed. Just closing socket is enough.
2017-08-02 Dirk, Julien, Daisuke Tsutomu, Riccardo Okinawa Installed one more x520 to have a connection between okinawa and osaka
2017-08-02 Dirk, Julien, Daisuke Tsutomu, Riccardo Okinawa Isocpu setting of CPU, all cores except 0,2,4,6,8,10 are isolated to be used only for EVB
2017-08-02 Dirk, Julien, Daisuke Tsutomu TIB firmware Updated to the newest one
2017-08-01 Dirk, Julien, Daisuke Tsutomu EVB test We managed to take data at the periodic trigger rate of 46.3 kHz.
2017-08-01 Dirk, Julien, Daisuke Tsutomu EVB test The new dragon firmware (dv5_1_0d_00, byte swapped) flushed to all modules
2017-07-31 Alicia et al MiniCamera setup 19 modules are mounted, 2 without trigger mezzanine
2017-07-28 Mazin Created this page Juan Calvo issued entrance permits for all participants of the tests