GRB230816A

Go back to Transient Working Group.

Alert Information

• Name/type of the alert: GRB 230816A
• GCN notice: https://gcn.gsfc.nasa.gov/other/1185673.swift
• Triggered by: Swift/BAT
• Alert coordinates:
  • RA: 21 53 46.92, Dec: +37 51 19.8
  • RA, Dec in deg (ICRS): 328.44552, 37.85549
• Alert arrival time: 16:08:48.29 UTC
• Other relevant information:
  • Redshift (z): N/A

Multi-wavelength Observations

Timeline

T0+	Instrument	Outcome	Outcome specific value (flux/UL/...)	Comment	Link
-		Initial detection
		UL
		Detection

LST Observations

• Dates of data-taking:
  • Date (time of observation h)
    • Zenith range (deg):
    • Transmission9km:
    • Observation condition: calima
    • Observation mode: Wobble
    • Runs:
    • Joint observations with MAGIC? : Yes but not at the same offset (bug of the TCU)
    • ELOG link:
    • Important comments: delay, ...

Quick Offline Analysis of RTA data by Mathieu de Bony (CEA - mathieu.debony@cea.fr)

Data-taking information

• Overall selected observation time: 1.76h
• Selected runs: 13948

13949 13950 13951 13952 13953 13955 13956 13957 13958 13959 13960 13961 13962 13963 13964 13965 13966 13967 13968 13969 13970

• Position analyzed: RA, Dec 328.44552, 37.85549

DL3 Production

Direct use of RTA DL3

High-level analysis

• Science Tool: gammapy 1.1
• Point-like IRF, 1D analysis

Analysis Results

Livetime : 6.68 h Significance : -0.21 sigma Excess : -15.5 Rate : -0.04 gamma per min

Theta2 plot

Analysis by Name (Institute - email)

Data-taking information

• Overall selected observation time:
• Selected runs:
• Position analyzed: RA, Dec

Monte Carlo information

• Link to MC files used:
  • Particle types:

DL1 data

Please include your settings to produce your DL1a and DL1b files. This includes whether you use LSTOSA, specific versions of lstchain, dllab scripts, cleaning levels, and calibration information.

Example :

Reprocessed using DL1a files produced by LSTOSA (lstchain v0.7.3) and dl1ab script (v0.7.5)

• original DL1a files

/fefs/aswg/data/real/DL1/20210808/v0.7.3/tailcut84/dl1_LST-1.Run0XXXX.XXXX.h5
/fefs/aswg/data/mc/DL1/20200629_prod5_trans_80/XXX/zenith_20deg/south_pointing/20210416_v0.7.3_prod5_trans_80_local_taicut_8_4/

• real data: tailcut8-4 (with cleaning based on pedestal RMS), dynamic cleaning

 /fefs/aswg/workspace/seiya.nozaki/data/BLLac/v0.7.3/tailcut84_dynamic_v075/DL1_raw/lstchain_standard_config.json

• MC: tailcut8-4 (with cleaning based on pedestal RMS), dynamic cleaning, PSF+NSB tuning

 "image_modifier": {
   "increase_nsb": true,
   "extra_noise_in_dim_pixels": 0.74,
   "extra_bias_in_dim_pixels": 0.38,
   "transition_charge": 8,
   "extra_noise_in_bright_pixels": 0.052,
   "increase_psf": true,
   "smeared_light_fraction": 0.125
 },

 /fefs/aswg/workspace/seiya.nozaki/data/MC/v0.7.5/tailcut84_dynamic_bllac/DL1_raw/lstchain_dl1ab_tune_MC_to_BLLac_config.json

• Produced DL1b files

/fefs/aswg/workspace/seiya.nozaki/data/MC/v0.7.5/tailcut84_dynamic_bllac/DL1_raw/data/
/fefs/aswg/workspace/seiya.nozaki/data/BLLac/v0.7.3/tailcut84_dynamic_v075/DL1_raw/Run0XXXX

Random forest

Please include the path to the RF files used or your specific .json files used in producing your RFs and for which source analysis (source dependent or independent), and variables used in the RF.

Example

• lstchain-0.7.6.dev242+g2086cb9

• source-indep (diffuse gamma, src_r<3deg, disp_norm)

/fefs/aswg/workspace/seiya.nozaki/data/MC/v0.7.5/tailcut84_dynamic_bllac/srcindep/RF/lstchain_standard_config.json

• source-dep

/fefs/aswg/workspace/seiya.nozaki/data/MC/v0.7.5/tailcut84_dynamic_bllac/srcdep/RF/lstchain_src_dep_config.json

DL2 data

Information about your DL2 data and settings such as: specifc versions of lstchain, specfic .json version used.

Example:

• lstchain-0.7.6.dev242+g2086cb9

• source-indep

/fefs/aswg/workspace/seiya.nozaki/data/MC/v0.7.5/tailcut84_dynamic_bllac/srcindep/DL2/data/
/fefs/aswg/workspace/seiya.nozaki/data/BLLac/v0.7.3/tailcut84_dynamic_v075/srcindep/DL2/data/dl2_LST-1.Run0XXXX_merged.h5

• source-dep

/fefs/aswg/workspace/seiya.nozaki/data/MC/v0.7.5/tailcut84_dynamic_bllac/srcdep/DL2/data/ 
/fefs/aswg/workspace/seiya.nozaki/data/BLLac/v0.7.3/tailcut84_dynamic_v075/srcdep/DL2/data/dl2_LST-1.Run0XXXX_merged.h5

DL3 data selection

Information about your DL3 data selection.

Example

• intensity > 50
• r: [0, 1 ]
• wl: [0.1, 1 ]
• leakage_intensity_width_2: [0, 0.2 ]

• source-indep
  • fixed_gh_cut: 0.3
  • fixed_theta_cut: 0.2

• source-dep
  • fixed_gh_cut: 0.7
  • fixed_alpha_cut: 10

High-level analysis

Please put any information about the production of higher level analysis here.

Example

• Science Tool: gammapy 0.18.2
• Point-like IRF, 1D analysis

Analysis Results

Please place higher-level analysis results (Spectra, SkyMaps, Lightcurves, etc) here. If the alert was observed for several nights please add plots for each night separately and all data together.