Logbook AMCBox

Enter comments in reverse time order

Date	Who did it?	Action	Comments	Documents
2018-08-08	Satoshi, Dragados	AMC cabling	We finished internal cables of 1 group (E). We started cabling of two boxes (B,D).
2018-08-07	Martin, Casana	IF plates assembly	1 Special Special IF was installed, more were not possible due to wind. Installation of missing tube holders finished.
2018-08-07	Christopher, Satoshi, Yusuke, Dragados	AMC cabling	We started from internal cables (box - mirrors). We finished actuator cables for 1 group (E).
2018-08-06	Martin, Casana	IF plates assembly	No installation of Special Special IF due to wind, installation of missing tube holders ongoing.
2018-08-06	Christopher, Dragados, Casana	AMC box installation	We brought metal bars with the cherry picker and finished the installation of all the 16 boxes.
2018-08-04	Christopher, Toni, Yusuke, Satoshi, Casana	AMC box installation	We brought up all the remained boxes in front of the correct positions with the cherry picker.
2018-08-03	Martin	IF plates assembly	7 missing tube spacers on 4 already installed IF plates installed. Rest will be done starting Monday by Casana.
2018-08-03	Christopher, Toni, Dragados	AMC box installation	We installed 5 AMC box of the lower half (C,7,F,B,D).
2018-08-02	Christopher, Martin, Toni, Yusuke, Satoshi, Dragados	AMC box installation	Yusuke and Satoshi finished preparation of the 16 boxes. We installed one AMC box (E, at the lowest) and brought up 6 boxes (C,7,A,F,B,D) near the correct positions inside the dish.
2018-08-02	Martin	IF plates assembly	Tube spacers for special special IF plates and for already installed IF plates assembled. All IF plates ready for installation on Monday.
2018-07-31	Martin, Satoshi	IF plates assembly	We prepared almost all of the 10 special special IF plates (except attaching actuator caps, leveling fixed points and finishing tube spacers).