| ID |
Date |
Author |
Type |
Category |
Subject |
Status |
Text |
 |
|
2
|
Tue Jan 22 09:37:03 2019 |
Ino Monteiro | PLC Software and Configuration | Software | Installation new PLC version | | Installation of the new PLC code and re-initilalisation
of the system. |
|
|
3
|
Tue Jan 22 15:55:25 2019 |
Drive Team | Software Installation | Software | TESTS Parkout Parkin | |
Many parkin and parkout operations
with different torque (with the clamping
system of the access tower (from 18% to 8% |
|
|
229
|
Mon Jan 28 15:27:35 2019 |
Drive Team | Telescope Operations | Software | Error Tests | |
Debugging of the "Parkout"
sequence with errors ==>
MOS
received the error and set the FSM in error |
|
|
230
|
Wed Jan 30 15:43:12 2019 |
Drive Team | Telescope Operations | Software | Tests Tracking | | Tests and debugging of the tracking procedure.
Many components are involved : PLC MOS GUIs.
Each component needs to be well |
|
|
240
|
Wed Mar 6 16:30:56 2019 |
Drive Team- Ino&Thierry&Armand | PLC + Control Software debugging | Software | Tracking mode debug | |
Debugging of the MOS plugin corresponding
to the tracking
|
|
|
242
|
Fri Mar 8 09:25:22 2019 |
Drive Team- Ino&Thierry&Armand | PLC + Control Software debugging | Software | Tracking debug and setup | |
Tracking procedure has been debugged
from the GUI-MOS (OPCUA Server with tracking
plugin)-PLC
Still some improvments to |
|
|
259
|
Tue Jul 2 21:25:07 2019 |
Dirk Hoffmann | Applications | Software | Current & Power Monitoring stuck ("Socomec display") | | The Current&Power Monitoring was not
updated and hidden by two emtpy modal dialogue
windows. |
|
|
261
|
Fri Jul 5 08:58:42 2019 |
Dirk Hoffmann | Problem Fixed | Software | Small problem with park-in | | When parking in yesterday, the telescope
drove to the nominal position (approx. 95°
zenith angle and -1° azimuth), but then |
|
|
278
|
Thu Jan 16 22:06:39 2020 |
tions applied to solve this issue :Martin Will, Thierry Le Flour | Telescope Operations | Software | Semi-Expert Drive GUI not connecting / MOS server not working | Fixed | In the late afternoon shifters noticed
the semi-expert drive GUI was not updating,
several restarts did not help. Checking into |
|
|
225
|
Thu Jan 24 10:52:59 2019 |
Drive Team | Hardware | Issues | | | After issues during the parkin procedures
( 100% elveation torque ) :
a visual inpsection has |
|
|
252
|
Fri Apr 26 23:17:07 2019 |
Alessandro for the drive team | Telescope Operations | Issues | drive tracking issue | |
We
encountered a couple of issue with tracking
- When we tried to track on polaris |
|
|
260
|
Wed Jul 3 21:02:09 2019 |
Dirk, Taka, Mitsunari, Yukiho, Noah | Telescope Operations | Issues | Feedback from shiftcrew | | (For Thierry with love <3 :-)
The semi-expert drive control panel
uses various terms for the zenith angle: |
|
|
265
|
Tue Jul 9 00:46:52 2019 |
Mitsunari, Yukiho, Noah, Moritz | Telescope Operations | Issues | Park-in problems | | At parking in, the telescope got stuck
at 94.254°. We checked in the container
that fuse Q21 went off. We did not see any |
|
|
266
|
Fri Jul 19 23:06:13 2019 |
Mitsunari, Tomohiro, Satoshi, Moritz, Yusuke | Telescope Operations | Issues | Telescope stuck in strange state/lost control by Semi-Expert GUI | | Tonight, we tracked Vega to test (a correction
of) the pointing offset of the Drive.
Around 22:30UTC, we tried different |
|
|
224
|
Wed Jan 23 15:10:34 2019 |
Drive Team | Telescope Operations | Hardware | | | Emergency stop applied because of a azimuth
value(encoder) not in the pre-defined range
+-0.015 |
|
|
226
|
Fri Jan 25 12:39:52 2019 |
Drive Team | Problem Fixed | Hardware | Brakes issues fixed | | The brake of the elevation issue has been
fixed. Operations on drive can be resumed. |
|
|
245
|
Mon Apr 1 07:43:23 2019 |
Drive Team- Ino&Thierry&Armand | Problem Fixed | Hardware | LST Parking control | |
On Wenesday morning (27/03/19)
:
With Holger and Robert (MPI)
, many telescope "park in/park out" |
|
|
247
|
Tue Apr 16 14:34:22 2019 |
Drive Team- Ino | Telescope Operations | Hardware | Cabling the azimuth end switches | |
Cabling the azimuth end switches.
|
|
|
249
|
Thu Apr 18 09:10:29 2019 |
Ino | PLC Software and Configuration | Hardware | Offset of the Zero Azimuth | | After pointing Polaris yesterday, it seems
that the zero position of the telescope was
incorrect but It's never had been calibrated |
|
|
251
|
Thu Apr 18 21:21:25 2019 |
Drive Team- Ino&Thierry&Alessandro | Telescope Operations | Hardware | Elevation limit switch issue | |
The 2 swicthes are too far |
|