| ID |
Date |
Author |
Type |
Category |
Subject |
Status |
Text |
 |
|
278
|
Thu Jan 16 22:06:39 2020 |
tions applied to solve this issue :Martin Will, Thierry Le Flour | Telescope Operations | Software | Semi-Expert Drive GUI not connecting / MOS server not working | Fixed | In the late afternoon shifters noticed
the semi-expert drive GUI was not updating,
several restarts did not help. Checking into |
|
|
269
|
Sat Jul 27 11:11:08 2019 |
Yusuke, Satoshi, Tomo, Yoshiki | Other | | GUI stacked due to a wrong shutdown procedure | | Drive GUI stacked due to a wrong shutdown
procedure (Jul. 27th 01-02UTC). This was
simply a human error. |
|
|
268
|
Tue Jul 23 13:50:43 2019 |
Yusuke, Patricia | Problem Fixed | | Reboot Flywheel PLC | | Regarding the problem on the Flywheel PLC
(see
here), we entered UC1 under the supervision of Daniel |
|
|
267
|
Mon Jul 22 23:07:20 2019 |
Yusuke, Daniel K., Mitsunari, Satoshi, Tomo, Juan Abel, Yoshiki | Telescope Operations | | Flywheel PLC down | | After finishing the normal start-up procedure,
we tried to park out by GUI, but got an error
(22:30 local time): "MSG_WARNINGPark_Out_TimeOut" |
|
|
1
|
Fri Jan 18 10:14:51 2019 |
Thierry Le Flour | Software Installation | General | Initlisation of the DRIVE logbook | | Here is the first entry in the DRIVE ELOG
logbook |
|
|
264
|
Sat Jul 6 23:17:54 2019 |
Moritz, Dirk | Telescope Operations | | Park-in problems | | When parking in the telescope, accidently
hit "Shutdown" button instead of
"Parkin" in Drive Semi-epert GUI. |
|
|
265
|
Tue Jul 9 00:46:52 2019 |
Mitsunari, Yukiho, Noah, Moritz | Telescope Operations | Issues | Park-in problems | | At parking in, the telescope got stuck
at 94.254°. We checked in the container
that fuse Q21 went off. We did not see any |
|
|
266
|
Fri Jul 19 23:06:13 2019 |
Mitsunari, Tomohiro, Satoshi, Moritz, Yusuke | Telescope Operations | Issues | Telescope stuck in strange state/lost control by Semi-Expert GUI | | Tonight, we tracked Vega to test (a correction
of) the pointing offset of the Drive.
Around 22:30UTC, we tried different |
|
|
273
|
Sun Nov 24 19:33:56 2019 |
Mathieu David Armand | Telescope Operations | General | CDM images for bending model | | - CDM images at park out position.
Exposure 100ms.
OARL on. |
|
|
274
|
Mon Nov 25 22:53:22 2019 |
Mathieu David Armand | Telescope Operations | | CDM images 19/11/25 | | Mg=1.25
DenebDark 60x1s
RA-2
TestTracking 60x1s Displacement
from Deneb RA-2
Deneb 60x1s
DenebLed |
|
|
276
|
Wed Nov 27 21:27:29 2019 |
Mathieu David Armand | Telescope Operations | | CDM & SG images with alternative target | | |
|
|
272
|
Thu Sep 19 19:10:39 2019 |
Martin, Ino, Thierry, Quentin, Thomas | Tracking Debugging | | Star images with various Az and Zd offsets | | We tracked stars at various zenith angles
and changed the Az and Zd offsets, taking
images with the PSF camera for each position. |
|
|
2
|
Tue Jan 22 09:37:03 2019 |
Ino Monteiro | PLC Software and Configuration | Software | Installation new PLC version | | Installation of the new PLC code and re-initilalisation
of the system. |
|
|
279
|
Mon Feb 10 14:57:56 2020 |
Ino + Gael + Thierry | Other | Hardware | Azimuth Locking System | Fixed | Last week we put in sevice the new ALS
completly modified:
_ Main System with new reducer. |
14x |
|
249
|
Thu Apr 18 09:10:29 2019 |
Ino | PLC Software and Configuration | Hardware | Offset of the Zero Azimuth | | After pointing Polaris yesterday, it seems
that the zero position of the telescope was
incorrect but It's never had been calibrated |
|
|
254
|
Wed Jun 26 20:06:22 2019 |
Ino | PLC + Control Software debugging | | Tracking Trajectory | | We sent a tracking with with RA211,08 and
DEC29,52
1st time the goto position of azimuth |
|
|
Draft
|
Thu Jun 27 12:04:43 2019 |
Ino | Problem Fixed | General | | | During this 2 weeks we solve this problems:
_ Park In: Sometimes the final
locking position was too limit and the "In |
|
|
256
|
Thu Jun 27 12:19:02 2019 |
Ino | Problem Fixed | General | PLC Status | | During this weeks we solve this problems:
_ Park In: Sometimes the final
locking position was too limit and the "In |
|
|
243
|
Thu Mar 28 10:34:41 2019 |
Drive Team- Ino&Thierry&Armand + Juli (IFAE) | Telescope Operations | | High speed drive tests | | new session of high speed drive tests after
issues with Power Supply.
Tests of emergency stop |
|
|
237
|
Wed Mar 6 10:54:33 2019 |
Drive Team- Ino&Thierry&Armand | Telescope Operations | General | DRIVE : High Speed tests | |
The FW issue is not solved . No
movement can be done
The FW is
going to be restarted ==> It takes several |
|
|
238
|
Wed Mar 6 14:58:51 2019 |
Drive Team- Ino&Thierry&Armand | Telescope Operations | General | Access tower failure | | During a park-in action , the acces tower
did not close correctly. |
|
|
239
|
Wed Mar 6 15:33:14 2019 |
Drive Team- Ino&Thierry&Armand | Telescope Operations | General | Test High Speed Drive | |
Test at 60% maximal speed from
-90 to 0
Check of the
FW discharge : No error (FW 2 : 95% FW1 : |
|
|
240
|
Wed Mar 6 16:30:56 2019 |
Drive Team- Ino&Thierry&Armand | PLC + Control Software debugging | Software | Tracking mode debug | |
Debugging of the MOS plugin corresponding
to the tracking
|
|
|
241
|
Fri Mar 8 09:20:29 2019 |
Drive Team- Ino&Thierry&Armand | Telescope Operations | General | High speed drive tests | |
On Thrusday :
new
movements at 45% from -90 to 270 have been
done.
No possible movement at |
|
|
242
|
Fri Mar 8 09:25:22 2019 |
Drive Team- Ino&Thierry&Armand | PLC + Control Software debugging | Software | Tracking debug and setup | |
Tracking procedure has been debugged
from the GUI-MOS (OPCUA Server with tracking
plugin)-PLC
Still some improvments to |
|
|
244
|
Mon Apr 1 07:36:04 2019 |
Drive Team- Ino&Thierry&Armand | Telescope Operations | General | Tracking debug and setup | |
Regulation of the motors (PID)
for slow and fast tracking and motor oscillations.
Implementation
and Debugging of the Semi-Expert control |
|
|
245
|
Mon Apr 1 07:43:23 2019 |
Drive Team- Ino&Thierry&Armand | Problem Fixed | Hardware | LST Parking control | |
On Wenesday morning (27/03/19)
:
With Holger and Robert (MPI)
, many telescope "park in/park out" |
|
|
248
|
Wed Apr 17 21:26:13 2019 |
Drive Team- Ino&Thierry&Alessandro, Satoshi | Telescope Operations | General | Tracking for mirrors alignment | |
Tracking at position :
RA
= 101.288541 RA Offset = -0.6
DEC
= -16.71343 DEC Offset = 0.7
|
|
|
250
|
Thu Apr 18 21:07:20 2019 |
Drive Team- Ino&Thierry&Alessandro | Telescope Operations | | TESTS Parkout Parkin for fixing the bolt issue | |
Different ParkOut and Parkin done
with different values for testing the torque
limitation.
By decreasing |
|
|
251
|
Thu Apr 18 21:21:25 2019 |
Drive Team- Ino&Thierry&Alessandro | Telescope Operations | Hardware | Elevation limit switch issue | |
The 2 swicthes are too far |
|
|
271
|
Mon Sep 16 08:59:41 2019 |
Drive Team- Ino&Thierry + Ievgen + Vitalii + Jean-Luc | PLC + Control Software debugging | | Test TCU<->Drive | | Thierry&Ino on site
Ievgen, Vitalli and Jean-Luc remotely.
TCU tests to perform the parkin-in |
|
|
231
|
Tue Feb 26 20:45:41 2019 |
Drive Team- Ino&Thierry | Telescope Operations | General | Tracking debug | | Start of the tracking debug ==> PLC
and MOS |
|
|
232
|
Tue Feb 26 20:47:15 2019 |
Drive Team- Ino&Thierry | Telescope Operations | General | Polaris point for mirrors aligment | | Pointing to polaris ==>
Azimuth = 0.808
Elevation = 59.941 + 1 degree (correction) |
|
|
233
|
Wed Feb 27 20:33:17 2019 |
Drive Team- Ino&Thierry | Telescope Operations | General | Polaris point for mirrors aligment | | Same operations as yesterday ==> pointing
to Polaris with the same coordinates |
|
|
234
|
Thu Feb 28 19:56:55 2019 |
Drive Team- Ino&Thierry | PLC Software and Configuration | | Tracking debug and setup | | Debugging of the tracking sequence :
PLC sequence : trajectory
tracking data correctly managed
PLC |
|
|
235
|
Thu Feb 28 20:01:44 2019 |
Drive Team- Ino&Thierry | Telescope Operations | General | Polaris point for mirrors aligment | | Same operations as yesterday ==> Polaris
position |
|
|
236
|
Tue Mar 5 14:42:22 2019 |
Drive Team- Ino&Thierry | Telescope Operations | General | High speed drive tests | | . Fisrt day of the high speed drive tests
with IFAE team.
Tests for tuning and generating |
|
|
246
|
Tue Apr 16 10:10:55 2019 |
Drive Team- Ino&Thierry | PLC Software and Configuration | | Elevation setup | |
1 degree has been added to the
Elevation accordingly to the last measurement
given by Olger
|
|
|
270
|
Thu Sep 12 16:41:53 2019 |
Drive Team- Ino&Thierry | PLC + Control Software debugging | | | | Tuesday September 110th :
Tests park-in and park-out
to manage the different type of failures
Tests |
|
|
247
|
Tue Apr 16 14:34:22 2019 |
Drive Team- Ino | Telescope Operations | Hardware | Cabling the azimuth end switches | |
Cabling the azimuth end switches.
|
|
|
3
|
Tue Jan 22 15:55:25 2019 |
Drive Team | Software Installation | Software | TESTS Parkout Parkin | |
Many parkin and parkout operations
with different torque (with the clamping
system of the access tower (from 18% to 8% |
|
|
223
|
Wed Jan 23 11:26:29 2019 |
Drive Team | PLC Software and Configuration | General | Azimuth tuning | |
To define precisely the correction
to apply to Azimuth positionning, a set of movements
have been done to calculte the correction |
|
|
224
|
Wed Jan 23 15:10:34 2019 |
Drive Team | Telescope Operations | Hardware | | | Emergency stop applied because of a azimuth
value(encoder) not in the pre-defined range
+-0.015 |
|
|
225
|
Thu Jan 24 10:52:59 2019 |
Drive Team | Hardware | Issues | | | After issues during the parkin procedures
( 100% elveation torque ) :
a visual inpsection has |
|
|
226
|
Fri Jan 25 12:39:52 2019 |
Drive Team | Problem Fixed | Hardware | Brakes issues fixed | | The brake of the elevation issue has been
fixed. Operations on drive can be resumed. |
|
|
227
|
Fri Jan 25 14:12:28 2019 |
Drive Team | Telescope Operations | General | Drive Movement : PArkin and Parkout | | Many parkin operations done. To confirm
the different movements , a Parkin test with
a azimuth position 20 and Elevation 70. |
|
|
228
|
Sat Jan 26 09:49:34 2019 |
Drive Team | Telescope Operations | General | Goto Position tests | | Many differents succesfull "goto
position" operations ... MOS configuration
file (XML) modified to aplly to correct Azimth |
|
|
229
|
Mon Jan 28 15:27:35 2019 |
Drive Team | Telescope Operations | Software | Error Tests | |
Debugging of the "Parkout"
sequence with errors ==>
MOS
received the error and set the FSM in error |
|
|
230
|
Wed Jan 30 15:43:12 2019 |
Drive Team | Telescope Operations | Software | Tests Tracking | | Tests and debugging of the tracking procedure.
Many components are involved : PLC MOS GUIs.
Each component needs to be well |
|
|
260
|
Wed Jul 3 21:02:09 2019 |
Dirk, Taka, Mitsunari, Yukiho, Noah | Telescope Operations | Issues | Feedback from shiftcrew | | (For Thierry with love <3 :-)
The semi-expert drive control panel
uses various terms for the zenith angle: |
|
|
262
|
Fri Jul 5 23:23:57 2019 |
Dirk, Moritz | Telescope Operations | General | Park-in report | | On park-in command, telescope went to the
right position 95/-1, but did not recognise
that it was there. |
|
|
257
|
Fri Jun 28 22:49:39 2019 |
Dirk Hoffmann | Telescope Operations | General | Telescope stuck | | After tracking Mk421, we abort current
action (acknowledged) and try to go to a
new source: RA=308.1, Dec=40.96. Drive Control |
|
|
258
|
Fri Jun 28 23:06:36 2019 |
Dirk Hoffmann | Telescope Operations | General | Telescope stuck | | Ino explained: MOS was totally desynchronised
with PLC. (It was assuming that the telescope
was parked.) He parked the telescope manually. |
|
|
259
|
Tue Jul 2 21:25:07 2019 |
Dirk Hoffmann | Applications | Software | Current & Power Monitoring stuck ("Socomec display") | | The Current&Power Monitoring was not
updated and hidden by two emtpy modal dialogue
windows. |
|
|
261
|
Fri Jul 5 08:58:42 2019 |
Dirk Hoffmann | Problem Fixed | Software | Small problem with park-in | | When parking in yesterday, the telescope
drove to the nominal position (approx. 95°
zenith angle and -1° azimuth), but then |
|
|
263
|
Sat Jul 6 22:47:38 2019 |
Dirk Hoffmann | Telescope Operations | General | Car flash from road above+ | | When checking the telescope visually outside,
while it was in the "park-out"
position, a car happened to pass by from |
|
|
275
|
Tue Nov 26 21:37:03 2019 |
David Sanchez, Armand Fiasson, Mathieu De Bony | Telescope Operations | | CDM bending model image 26-11-2019 | | The aim was to observe several stars with
different magnitude and check the sensitivity
of the CDM. We wanted to use a semi-automatic |
|
|
277
|
Sat Dec 7 19:16:01 2019 |
Daniel Mazin, Koji Noda | Hardware | Hardware | ALS East: problem and preliminary solution | | On Dec 6, Dario, Frederic and Yuji showed
to Koji Noda and Daniel Mazin how to operate
the new ALS. The idea was to do an unlock |
6x |
|
252
|
Fri Apr 26 23:17:07 2019 |
Alessandro for the drive team | Telescope Operations | Issues | drive tracking issue | |
We
encountered a couple of issue with tracking
- When we tried to track on polaris |
|
|
253
|
Thu May 30 13:18:04 2019 |
Alessandro | Telescope Operations | | semi expert gui (marginal) issues | | - During shutter tests, we were requested
to move the telescope many times between
two positions at different zenith. Sometimes, |
|